VOLVO
ECM-P062E09 - Fuel Injector Driver Circuit Performance Bank 2. General Failure Information. Component Failures
System
Motorstyring (ECM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
7 modellerS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V70 (2008–), XC60 (2009–)
Vis modeller per årsmodell og motor (20)
- Volvo S60 (2011–)2011Kun motor: B4164T, B4164T3, B4204T6, B4204T7
- Volvo S60 (2011–)2012–2014Kun motor: B4164T, B4164T2, B4164T3, B4204T7
- Volvo S60 (2011–)2015Kun motor: B4164T, B4164T2, B4164T3
- Volvo S80 (2007–)2010Kun motor: B4204T6
- Volvo S80 (2007–)2011Kun motor: B4164T, B4204T6, B4204T7
- Volvo S80 (2007–)2012–2014Kun motor: B4164T, B4164T2, B4204T6, B4204T7
- Volvo S80 (2007–)2015Kun motor: B4164T
- Volvo V40 (2013–)2013Kun motor: B4164T, B4164T3
- Volvo V40 (2013–)2014–2015Kun motor: B4164T, B4164T3, B4164T4
- Volvo V40 Cross Country (2013–)2013–2015Kun motor: B4164T
- Volvo V60 (2011–)2011Kun motor: B4164T, B4164T3, B4204T6, B4204T7
- Volvo V60 (2011–)2012–2014Kun motor: B4164T, B4164T2, B4164T3, B4204T7
- Volvo V60 (2011–)2015Kun motor: B4164T, B4164T2, B4164T3
- Volvo V70 (2008–)2010Kun motor: B4204T6
- Volvo V70 (2008–)2011Kun motor: B4164T, B4204T6, B4204T7
- Volvo V70 (2008–)2012–2014Kun motor: B4164T, B4164T2, B4204T7
- Volvo V70 (2008–)2015Kun motor: B4164T, B4164T2
- Volvo XC60 (2009–)2010Kun motor: B4204T6
- Volvo XC60 (2009–)2011–2012Kun motor: B4204T6, B4204T7
- Volvo XC60 (2009–)2013–2015Kun motor: B4204T7
Hva betyr feilkoden?
Although the fault code concerns a component fault, the condition is a current signal to the bank 2 injectors that is too low, as seen by the engine control module. It is set when the signal does not match what has been requested, and it may be due to poor contact in the injector connectors or a damaged control module.
Mulige årsaker
- Contact resistance or oxidation in the connections
- Damaged engine control module (ECM)
Hva du kan gjøre
- 1Check that the connectors at the bank 2 injectors are secure and free from oxidation
- 2If you have a diagnostic tool: read the status of the code after the repair
- 3If the fault remains after these checks: have a workshop replace the control module or check it
Symptomer du kan merke3
- The engine does not start, sometimes or all the time
- The engine is hard to start and the starter motor cranks slowly, sometimes or all the time
- The check engine lamp lights or behaves abnormally
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.