VOLVO
ECM-P062E11 - Fuel Injector Driver Circuit Performance Bank 2. General Electrical Failures. Circuit short to ground
System
Motorstyring (ECM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
8 modellerS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Vis modeller per årsmodell og motor (8)
- Volvo S60 (2011–)2014–2015Kun motor: D4204T5
- Volvo S80 (2007–)2014–2015Kun motor: D4204T5
- Volvo V40 (2013–)2015Kun motor: D4204T14
- Volvo V40 Cross Country (2013–)2015Kun motor: D4204T14
- Volvo V60 (2011–)2014–2015Kun motor: D4204T5
- Volvo V70 (2008–)2014–2015Kun motor: D4204T5
- Volvo XC60 (2009–)2014–2015Kun motor: D4204T5
- Volvo XC70 (2008–)2014–2015Kun motor: D4204T5
Hva betyr feilkoden?
The code concerns bank 2, where cylinders 2 and 3 are connected. The engine control module monitors the fuel system and sets the fault code when the signal to the bank 2 injectors is wrong. Here the problem is a short to ground, which may be caused by wiring or damaged injectors.
Mulige årsaker
- Open or short circuit in the wiring
- Damaged injection valves
- A fault inside the engine control module (ECM)
Hva du kan gjøre
- 1Look for chafed wiring to the bank 2 injectors and check that the control signal wires are not short-circuited to each other
- 2With the ignition off and a multimeter, check that the wires to the bank 2 injectors have no break and no contact with ground
- 3Check that the connectors at the bank 2 injectors are secure and free from contact resistance and oxidation
- 4Have a workshop measure the resistance of the injectors if the fault remains
Symptomer du kan merke4
- Uneven idle
- The engine stalls at idle, particularly with the air conditioning on
- The engine stalls while driving, sometimes or all the time
- The check engine lamp lights or behaves abnormally
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.