VOLVO
ECM-P064C09 - Glow Plug Control Module 1. General Failure Information. Component Failures
System
Motorstyring (ECM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
8 modellerS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Vis modeller per årsmodell og motor (8)
- Volvo S60 (2011–)2014–2015Kun motor: D4204T5
- Volvo S80 (2007–)2014–2015Kun motor: D4204T5
- Volvo V40 (2013–)2015Kun motor: D4204T14
- Volvo V40 Cross Country (2013–)2015Kun motor: D4204T14
- Volvo V60 (2011–)2014–2015Kun motor: D4204T5
- Volvo V70 (2008–)2014–2015Kun motor: D4204T5
- Volvo XC60 (2009–)2014–2015Kun motor: D4204T5
- Volvo XC70 (2008–)2014–2015Kun motor: D4204T5
Hva betyr feilkoden?
The code concerns glow plug control module 1, which the ECM uses to control the glow plugs. It is set when the signal is missing or incorrect, and it belongs to the component failures.
Mulige årsaker
- Damaged fuse
- Contact resistance or oxidation in the connectors
- Open circuit in the signal wire
- Damaged glow plug control unit
Hva du kan gjøre
- 1Check that the fuse is intact
- 2Check the connectors at the glow plug control unit for contact resistance and oxidation
- 3Use a multimeter to check that the signal wire to the glow plug control unit has no open circuit
- 4If you have diagnostic equipment, activate the glowing with the tool and check that it switches on
- 5If the fuse and wiring are intact but the fault remains, have a workshop check the glow plug control unit
Symptomer du kan merke2
- The engine is hard to start, sometimes or all the time, and cranks slowly at start-up
- The engine is hard to start on a cold start
Hva feilen kan påvirke1
- Glowing is switched off
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.