VOLVO
ECM-P064C44 - Glow Plug Control Module 1. System Internal Failures. Data memory failure
System
Motorstyring (ECM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
8 modellerS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Vis modeller per årsmodell og motor (8)
- Volvo S60 (2011–)2014–2015Kun motor: D4204T5
- Volvo S80 (2007–)2014–2015Kun motor: D4204T5
- Volvo V40 (2013–)2015Kun motor: D4204T14
- Volvo V40 Cross Country (2013–)2015Kun motor: D4204T14
- Volvo V60 (2011–)2014–2015Kun motor: D4204T5
- Volvo V70 (2008–)2014–2015Kun motor: D4204T5
- Volvo XC60 (2009–)2014–2015Kun motor: D4204T5
- Volvo XC70 (2008–)2014–2015Kun motor: D4204T5
Hva betyr feilkoden?
The code concerns the data memory of glow plug control module 1. Certain internal signals from the module, such as the adaptations for the glow plugs, are not kept from one driving cycle to the next. The ECM controls the glow plugs through the module, and the code is set when the adaptations are not stored.
Mulige årsaker
- The glow plugs are damaged
- Damaged glow plug control unit
Hva du kan gjøre
- 1Where possible, check that glowing can be activated and works, using the buttons or a tool
- 2Clear the fault code and run the car for a while to see whether it returns
- 3Check that the fuses are intact and that the connectors to the glow plug control unit are secure, free from oxidation
- 4If you have diagnostic equipment, read the fault status after one driving cycle and see whether the fault comes back
- 5If the connectors are intact and the fault returns, have a workshop check the glow plugs and the glow plug control unit
Symptomer du kan merke2
- The engine is hard to start, sometimes or all the time, and cranks slowly at start-up
- The engine is hard to start on a cold start
Hva feilen kan påvirke1
- Glow plug operation is limited
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.