VOLVO
ECM-P065200 - Sensor Reference Voltage B Circuit Low. General Failure Information. No sub type information
System
Motorstyring (ECM)
Volvo-modeller feilkoden gjelder for
Feilkoden har ulik betydning avhengig av modell, årsmodell eller motor. Velg betydningen som gjelder din bil.
Gjelder følgende modeller:
11 modellerC30 (2007–2013), S40 (2004–2013), S60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V50 (2004–2013), V60 (2011–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Vis modeller per årsmodell og motor (29)
- Volvo C30 (2007–2013)2011–2013Kun motor: D4162T
- Volvo S40 (2004–2013)2011–2012Kun motor: D4162T
- Volvo S60 (2011–)2011–2012Kun motor: B5254T5, D4162T
- Volvo S60 (2011–)2013Kun motor: D4162T
- Volvo S60 (2011–)2014–2015Kun motor: B4204T10, B4204T11, B4204T12, B4204T15, B4204T9, D4162T
- Volvo S80 (2007–)2007Kun motor: B5254T6
- Volvo S80 (2007–)2008Kun motor: B5254T6, D4204T
- Volvo S80 (2007–)2009Kun motor: B5254T6, B5254T8, D4204T
- Volvo S80 (2007–)2010Kun motor: B5254T10, B5254T11, B5254T8, D4204T
- Volvo S80 (2007–)2011Kun motor: B5254T10, B5254T11, B5254T8
- Volvo S80 (2007–)2012Kun motor: B5254T10, D4162T
- Volvo S80 (2007–)2013Kun motor: D4162T
- Volvo S80 (2007–)2014–2015Kun motor: B4204T11, B4204T12, B4204T15, D4162T
- Volvo V40 (2013–)2013–2014Kun motor: D4162T
- Volvo V40 (2013–)2015Kun motor: B4204T11, D4162T
- Volvo V40 Cross Country (2013–)2013–2014Kun motor: D4162T
- Volvo V40 Cross Country (2013–)2015Kun motor: B4204T11, D4162T
- Volvo V50 (2004–2013)2011–2012Kun motor: D4162T
- Volvo V60 (2011–)2011–2013Kun motor: D4162T
- Volvo V60 (2011–)2014–2015Kun motor: B4204T11, B4204T12, B4204T15, B4204T9, D4162T
- Volvo V70 (2008–)2008Kun motor: B5254T6, D4204T
- Volvo V70 (2008–)2009Kun motor: B5254T6, B5254T8, D4204T
- Volvo V70 (2008–)2010Kun motor: B5254T10, B5254T11, D4204T
- Volvo V70 (2008–)2011Kun motor: B5254T10, B5254T11
- Volvo V70 (2008–)2012Kun motor: B5254T10, D4162T
- Volvo V70 (2008–)2013Kun motor: D4162T
- Volvo V70 (2008–)2014–2015Kun motor: B4204T11, D4162T
- Volvo XC60 (2009–)2014–2015Kun motor: B4204T10, B4204T11, B4204T12, B4204T15, B4204T9
- Volvo XC70 (2008–)2014–2015Kun motor: B4204T11
Hva betyr feilkoden?
Reference voltage B is too low. The ECM checks the internal supply circuits for the components and sets the code when the voltage in one of them is abnormal. The cause may be wiring, a sensor, the battery or the charging system, but also the engine control module itself.
Mulige årsaker
- Voltage cable to the sensor shorted to ground or supply voltage
- Damaged sensor
- Damaged engine control module (ECM)
- Battery voltage too low, or a damaged battery
- Fault in the charging system
Hva du kan gjøre
- 1If a fault code for a sensor connected to the supply is stored, trace that one first
- 2Check the battery condition and that the charging system works, and remedy as needed
- 3Check that the fuses are intact and that the connectors to the sensors are secure
- 4Use a multimeter to check that the wires to the sensors are not shorted to ground or supply voltage
- 5If the battery, charging and wiring are in order but the fault remains, have a workshop check the engine control module
Symptomer du kan merke5
- The car performs poorly and lacks power, especially at take-off
- The engine misfires or stalls while driving
- The engine is difficult to start, the starter motor does not turn or turns but the engine does not start
- The engine hesitates or surges during acceleration, during deceleration or at steady speed
- Warning symbol and text message in the display
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.