VOLVO
ECM-P065300 - Sensor Reference Voltage B Circuit High. General Failure Information. No sub type information
System
Motorstyring (ECM)
Volvo-modeller feilkoden gjelder for
Feilkoden har ulik betydning avhengig av modell, årsmodell eller motor. Velg betydningen som gjelder din bil.
Gjelder følgende modeller:
11 modellerC30 (2007–2013), S40 (2004–2013), S60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V50 (2004–2013), V60 (2011–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Vis modeller per årsmodell og motor (29)
- Volvo C30 (2007–2013)2011–2013Kun motor: D4162T
- Volvo S40 (2004–2013)2011–2012Kun motor: D4162T
- Volvo S60 (2011–)2011–2012Kun motor: B5254T5, D4162T
- Volvo S60 (2011–)2013Kun motor: D4162T
- Volvo S60 (2011–)2014–2015Kun motor: B4204T10, B4204T11, B4204T12, B4204T15, B4204T9, D4162T
- Volvo S80 (2007–)2007Kun motor: B5254T6
- Volvo S80 (2007–)2008Kun motor: B5254T6, D4204T
- Volvo S80 (2007–)2009Kun motor: B5254T6, B5254T8, D4204T
- Volvo S80 (2007–)2010Kun motor: B5254T10, B5254T11, B5254T8, D4204T
- Volvo S80 (2007–)2011Kun motor: B5254T10, B5254T11, B5254T8
- Volvo S80 (2007–)2012Kun motor: B5254T10, D4162T
- Volvo S80 (2007–)2013Kun motor: D4162T
- Volvo S80 (2007–)2014–2015Kun motor: B4204T11, B4204T12, B4204T15, D4162T
- Volvo V40 (2013–)2013–2014Kun motor: D4162T
- Volvo V40 (2013–)2015Kun motor: B4204T11, D4162T
- Volvo V40 Cross Country (2013–)2013–2014Kun motor: D4162T
- Volvo V40 Cross Country (2013–)2015Kun motor: B4204T11, D4162T
- Volvo V50 (2004–2013)2011–2012Kun motor: D4162T
- Volvo V60 (2011–)2011–2013Kun motor: D4162T
- Volvo V60 (2011–)2014–2015Kun motor: B4204T11, B4204T12, B4204T15, B4204T9, D4162T
- Volvo V70 (2008–)2008Kun motor: B5254T6, D4204T
- Volvo V70 (2008–)2009Kun motor: B5254T6, B5254T8, D4204T
- Volvo V70 (2008–)2010Kun motor: B5254T10, B5254T11, D4204T
- Volvo V70 (2008–)2011Kun motor: B5254T10, B5254T11
- Volvo V70 (2008–)2012Kun motor: B5254T10, D4162T
- Volvo V70 (2008–)2013Kun motor: D4162T
- Volvo V70 (2008–)2014–2015Kun motor: B4204T11, D4162T
- Volvo XC60 (2009–)2014–2015Kun motor: B4204T10, B4204T11, B4204T12, B4204T15, B4204T9
- Volvo XC70 (2008–)2014–2015Kun motor: B4204T11
Hva betyr feilkoden?
Reference voltage B to the sensors is excessive. The ECM examines the internal supply circuits to the components, and the code is set when the voltage in one of them is wrong. The cause may be in the wiring or a sensor, but also in the battery, the charging system or the engine control module.
Mulige årsaker
- Voltage cable to the sensor shorted to ground or supply voltage
- Damaged sensor
- Damaged engine control module (ECM)
- Fault in the charging system or a damaged battery
Hva du kan gjøre
- 1Read the fault codes and deal with any stored sensor codes first; they should clear once this code is dealt with
- 2Check the battery condition and that the charging system works
- 3Check that the relevant fuses are intact and that the connectors to the sensors are secure
- 4Use a multimeter to check that the wires to the sensors are not shorted to ground or supply voltage
- 5Clear the fault codes after the repair, road test the car, and have a workshop check the engine control module if the fault returns
Symptomer du kan merke5
- The car performs poorly and lacks power
- The starter motor does not turn, or turns without the engine starting
- The engine misfires or is hard to start
- Uneven idle
- Warning symbol and text message in the display
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.