VOLVO
ECM-P065A07 - Generator System Performance. General Failure Information. Mechanical Failures
System
Motorstyring (ECM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
9 modellerS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V70 (2008–), XC60 (2009–), XC70 (2008–), XC90 (2003–)
Vis modeller per årsmodell og motor (26)
- Volvo S60 (2011–)2011Kun motor: B4164T, B4164T3, B4204T6, B4204T7
- Volvo S60 (2011–)2012–2014Kun motor: B4164T, B4164T2, B4164T3, B4204T7
- Volvo S60 (2011–)2015Kun motor: B4164T, B4164T2, B4164T3
- Volvo S80 (2007–)2007–2009Kun motor: D5244T4, D5244T5
- Volvo S80 (2007–)2010Kun motor: B4204T6, D4164T
- Volvo S80 (2007–)2011Kun motor: B4164T, B4204T6, B4204T7, D4164T
- Volvo S80 (2007–)2012–2014Kun motor: B4164T, B4164T2, B4204T6, B4204T7
- Volvo S80 (2007–)2015Kun motor: B4164T
- Volvo V40 (2013–)2013Kun motor: B4164T, B4164T3
- Volvo V40 (2013–)2014–2015Kun motor: B4164T, B4164T3, B4164T4
- Volvo V40 Cross Country (2013–)2013–2015Kun motor: B4164T
- Volvo V60 (2011–)2011Kun motor: B4164T, B4164T3, B4204T6, B4204T7
- Volvo V60 (2011–)2012–2014Kun motor: B4164T, B4164T2, B4164T3, B4204T7
- Volvo V60 (2011–)2015Kun motor: B4164T, B4164T2, B4164T3
- Volvo V70 (2008–)2008–2009Kun motor: D5244T4, D5244T5
- Volvo V70 (2008–)2010Kun motor: B4204T6, D4164T
- Volvo V70 (2008–)2011Kun motor: B4164T, B4204T6, B4204T7, D4164T
- Volvo V70 (2008–)2012–2014Kun motor: B4164T, B4164T2, B4204T7
- Volvo V70 (2008–)2015Kun motor: B4164T, B4164T2
- Volvo XC60 (2009–)2009Alle motorer unntatt: B6304T2
- Volvo XC60 (2009–)2010Kun motor: B4204T6
- Volvo XC60 (2009–)2011–2012Kun motor: B4204T6, B4204T7
- Volvo XC60 (2009–)2013–2015Kun motor: B4204T7
- Volvo XC70 (2008–)2008Alle motorer unntatt: B6324S
- Volvo XC70 (2008–)2009Kun motor: D5244T4, D5244T5
- Volvo XC90 (2003–)2013–2014Kun motor: D5244T18, D5244T5
Hva betyr feilkoden?
The code concerns mechanical faults in the generator system, and it is set when the engine control module (ECM) receives fault information from the alternator control module (ACM) or the communication between the two is faulty. The check can be carried out with the engine running.
Mulige årsaker
- Damaged auxiliary drive belt and belt tensioner
- Damaged freewheel
- Related fault code ECM-P065A01; trace it according to that code
- Related fault code ECM-P0A3B00; ambient temperature too high
- Related fault code ECM-P163287; open circuit in the signal wire
Hva du kan gjøre
- 1With the ignition off, check the auxiliary drive belt and the belt tensioner for damage
- 2Have a workshop check that the alternator freewheel works
- 3Check that the fuses are intact and that the connectors in the charging system are secure
- 4If you have diagnostic equipment, read the alternator's charging current in live data with the engine running
Symptomer du kan merke3
- The battery is dead
- The battery has low voltage
- The charging warning light comes on or behaves abnormally
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.