VOLVO
ECM-P065B00 - Generator control circuit range/performance. General Failure Information. No sub type information
System
Motorstyring (ECM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
5 modellerS80 (2007–), V70 (2008–), XC60 (2009–), XC70 (2008–), XC90 (2003–)
Vis modeller per årsmodell og motor (9)
- Volvo S80 (2007–)2007Kun motor: D5244T4, D5244T5
- Volvo S80 (2007–)2008–2009Kun motor: B4204S3, B4204S4, D5244T4, D5244T5
- Volvo S80 (2007–)2010–2011Kun motor: B4204S3, B4204S4, D4164T
- Volvo V70 (2008–)2008–2009Kun motor: B4204S3, B4204S4, D5244T4, D5244T5
- Volvo V70 (2008–)2010–2011Kun motor: B4204S3, B4204S4, D4164T
- Volvo XC60 (2009–)2009Alle motorer unntatt: B6304T2
- Volvo XC70 (2008–)2008Alle motorer unntatt: B6324S
- Volvo XC70 (2008–)2009Kun motor: D5244T4, D5244T5
- Volvo XC90 (2003–)2013–2014Kun motor: D5244T18, D5244T5
Hva betyr feilkoden?
The ECM offsets engine torque to account for the load from the alternator. The code is set when that compensation goes beyond a limit value.
Mulige årsaker
- Damaged battery
- Fault in the charging system
- Overloaded or damaged alternator
- A charger with too high charge voltage was hooked up before
- Worn carbon brushes
- Damaged alternator control module (ACM), which holds the charge regulator
Hva du kan gjøre
- 1Check that the fuses are intact and that the battery is in good condition
- 2Where possible, check the relevant functions of the car with the buttons, controls or a test drive
- 3If a charger with too high charge voltage has been hooked up before, tell the workshop
- 4Read the fault status after the test drive and see whether the fault is still active
- 5Have a workshop check the alternator's carbon brushes and the charge regulator
Symptomer du kan merke1
- The battery discharges
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.