Hopp til innhold
    OBD Tuning
    SEND TIL OSS
    SEND TIL OSS
    Hjem
    Feilkoder
    VOLVO
    ECM-P066200
    VOLVO

    ECM-P066200 - Intake Manifold Tuning Valve Control Circuit High - Bank 1. General Failure Information. No sub type information

    System

    Motorstyring (ECM)

    Volvo-modeller feilkoden gjelder for

    Gjelder følgende modeller:

    5 modeller

    S80 (2007–), V70 (2008–), XC60 (2009–), XC70 (2008–), XC90 (2003–)

    Vis modeller per årsmodell og motor (16)
    • Volvo S80 (2007–)2007–2009Kun motor: B6324S, B8444S
    • Volvo S80 (2007–)2010Kun motor: B6324S, B6324S2, B8444S
    • Volvo S80 (2007–)2011Kun motor: B6324S4, B6324S5, B8444S
    • Volvo S80 (2007–)2012–2015Kun motor: B6324S4, B6324S5
    • Volvo V70 (2008–)2008–2009Kun motor: B6324S
    • Volvo V70 (2008–)2010Kun motor: B6324S, B6324S2
    • Volvo V70 (2008–)2011–2014Kun motor: B6324S5
    • Volvo XC60 (2009–)2010Kun motor: B6324S, B6324S2
    • Volvo XC60 (2009–)2011–2015Kun motor: B6324S4, B6324S5
    • Volvo XC70 (2008–)2008–2009Kun motor: B6324S
    • Volvo XC70 (2008–)2010Kun motor: B6324S, B6324S2
    • Volvo XC70 (2008–)2011–2015Kun motor: B6324S4, B6324S5
    • Volvo XC90 (2003–)2005–2006Kun motor: B8444S
    • Volvo XC90 (2003–)2007–2010Kun motor: B6324S, B8444S
    • Volvo XC90 (2003–)2011Kun motor: B6324S5, B8444S
    • Volvo XC90 (2003–)2012–2014Kun motor: B6324S5

    Hva betyr feilkoden?

    On bank 1 the ECM sets the dampers in the variable intake system (VIS) through the control valve for their vacuum motor. The code is set when the control signal is too high.

    Mulige årsaker

    • Signal wire shorted to supply voltage
    • Damaged control valve
    • Damaged damper actuator

    Hva du kan gjøre

    1. 1Check that the fuses are intact and that the relevant functions of the car work, using the buttons, controls or a test drive
    2. 2If you have diagnostic equipment, activate the variable intake control valve and listen for a clicking sound from the valve
    3. 3With the ignition off, use a multimeter to check that the signal wire to the control valve is not shorted to supply voltage
    4. 4If the signal wire is intact but the fault remains, have a workshop check the control valve and the damper

    Symptomer du kan merke3

    • The malfunction indicator lamp lights up
    • The car performs poorly and lacks power, especially at take-off
    • The engine hesitates or surges during acceleration, during deceleration or at steady speed

    Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.

    OBD Tuning

    Sveriges ledende ekspertsenter for bilelektronikk. Vi tilbyr profesjonell ECU-tuning, reparasjon av styreenheter og diagnostikk med 12 måneders garanti.

    Tjenester

    • Motoroptimalisering
    • ECU Reparasjon
    • Modulkloning
    • Instrumentpanel
    • SRS / Airbag
    • Startsperre

    Database & Diagnostikk

    • ECU-database
    • DTC Feilkodekatalog
    • Diagnoseguider & Måleverdier
    • AI Feilkodeanalysator
    • Nyheter

    ECU-produsenter

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    Selskap

    • Om oss
    • Kontakt
    • Verkstedpartnere
    • Fraktguide
    • Garanti
    • FAQ
    • Vilkår
    • Personvern
    • Nettstedskart

    • Motoroptimalisering
    • ECU Reparasjon
    • Modulkloning
    • Instrumentpanel
    • SRS / Airbag
    • Startsperre

    • ECU-database
    • DTC Feilkodekatalog
    • Diagnoseguider & Måleverdier
    • AI Feilkodeanalysator
    • Nyheter

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    • Om oss
    • Kontakt
    • Verkstedpartnere
    • Fraktguide
    • Garanti
    • FAQ
    • Vilkår
    • Personvern
    • Nettstedskart

    Besøk oss

    Gjuterigatan 29, Karlstad

    Ring oss

    054-830 480

    E-post oss

    service@obdtuning.se

    © 2026 OBD Tuning Karlstad. Alle rettigheter forbeholdt.