VOLVO
ECM-P066500 - Intake Manifold Tuning Valve Control Circuit High - Bank 2. General Failure Information. No sub type information
System
Motorstyring (ECM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
5 modellerS80 (2007–), V70 (2008–), XC60 (2009–), XC70 (2008–), XC90 (2003–)
Vis modeller per årsmodell og motor (13)
- Volvo S80 (2007–)2007–2009Kun motor: B6324S
- Volvo S80 (2007–)2010Kun motor: B6324S, B6324S2
- Volvo S80 (2007–)2011–2015Kun motor: B6324S4, B6324S5
- Volvo V70 (2008–)2008–2009Kun motor: B6324S
- Volvo V70 (2008–)2010Kun motor: B6324S, B6324S2
- Volvo V70 (2008–)2011–2014Kun motor: B6324S5
- Volvo XC60 (2009–)2010Kun motor: B6324S, B6324S2
- Volvo XC60 (2009–)2011–2015Kun motor: B6324S4, B6324S5
- Volvo XC70 (2008–)2008–2009Kun motor: B6324S
- Volvo XC70 (2008–)2010Kun motor: B6324S, B6324S2
- Volvo XC70 (2008–)2011–2015Kun motor: B6324S4, B6324S5
- Volvo XC90 (2003–)2007–2010Kun motor: B6324S
- Volvo XC90 (2003–)2011–2014Kun motor: B6324S5
Hva betyr feilkoden?
On bank 2 the ECM watches the control signal to the damper, and the code is set when that signal reads too high.
Mulige årsaker
- Signal wire shorted to supply voltage
- Damaged damper actuator
Hva du kan gjøre
- 1Check that the fuses are intact and that the relevant functions of the car work
- 2With the ignition off, use a multimeter to check that the signal wire to the control valve is not shorted to supply voltage
- 3If you have diagnostic equipment, activate the control valve and listen for a clicking sound
- 4If the signal wire is intact, have a workshop check the damper actuator
Symptomer du kan merke3
- The malfunction indicator lamp lights up
- The car performs poorly and lacks power
- The engine hesitates or surges during acceleration or at steady speed
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.