VOLVO
ECM-P066C00 - Cylinder 2 Glow Plug Control Circuit Low. General Failure Information. No sub type information
System
Motorstyring (ECM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
8 modellerS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Vis modeller per årsmodell og motor (8)
- Volvo S60 (2011–)2014–2015Kun motor: D4204T5
- Volvo S80 (2007–)2014–2015Kun motor: D4204T5
- Volvo V40 (2013–)2015Kun motor: D4204T14
- Volvo V40 Cross Country (2013–)2015Kun motor: D4204T14
- Volvo V60 (2011–)2014–2015Kun motor: D4204T5
- Volvo V70 (2008–)2014–2015Kun motor: D4204T5
- Volvo XC60 (2009–)2014–2015Kun motor: D4204T5
- Volvo XC70 (2008–)2014–2015Kun motor: D4204T5
Hva betyr feilkoden?
This code is about glow plug 2 in cylinder 2. The ECM drives the glow plugs through a glow plug control module, and a fault on glow plug 2 causes the code to be set. The signal is too low.
Mulige årsaker
- Poor contact or oxidation in the connectors
- Signal wire shorted to ground
Hva du kan gjøre
- 1Check that the fuses are intact
- 2With the ignition off, check the connectors at the glow plug control module and at glow plug 2 for contact resistance and oxidation
- 3Use a multimeter to check that the signal wire to glow plug 2 is not shorted to ground
- 4If the connectors and wire are intact but the fault remains, have a workshop check glow plug 2 and the glow plug control module
Symptomer du kan merke3
- The engine is hard to start and cranks slowly, at times or all the time
- The engine is hard to start and cranks slowly after use
- The engine is hard to start and cranks slowly on a cold start
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.