VOLVO
ECM-P067000 - Glow Plug Control Module 1 Control Circuit / Open. General Failure Information. No sub type information
System
Motorstyring (ECM)
Volvo-modeller feilkoden gjelder for
Feilkoden har ulik betydning avhengig av modell, årsmodell eller motor. Velg betydningen som gjelder din bil.
Gjelder følgende modeller:
9 modellerC30 (2007–2013), S40 (2004–2013), S60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V50 (2004–2013), V60 (2011–), V70 (2008–)
Vis modeller per årsmodell og motor (9)
- Volvo C30 (2007–2013)2011–2013Kun motor: D4162T
- Volvo S40 (2004–2013)2011–2012Kun motor: D4162T
- Volvo S60 (2011–)2011–2015Kun motor: D4162T
- Volvo S80 (2007–)2012–2015Kun motor: D4162T
- Volvo V40 (2013–)2013–2015Kun motor: D4162T
- Volvo V40 Cross Country (2013–)2013–2015Kun motor: D4162T
- Volvo V50 (2004–2013)2011–2012Kun motor: D4162T
- Volvo V60 (2011–)2011–2015Kun motor: D4162T
- Volvo V70 (2008–)2012–2015Kun motor: D4162T
Hva betyr feilkoden?
The control circuit for glow plug control module 1 is open. The ECM controls the glow plug function through a relay in the relay and fuse box in the engine compartment, and the code is set when the signal is too high, missing or too low.
Mulige årsaker
- Poor contact, oxidation or loose connections in the terminals
- Open circuit or short to ground or supply voltage in the signal wire
- Open circuit or short to ground in the supply wire to the relay
- Short to ground or supply voltage in the wires to the glow plugs
- Damaged glow plug relay
Hva du kan gjøre
- 1Check that the fuses are intact, including the fuse for the glow relay
- 2With the ignition off, check the connections to the glow relay for contact resistance and oxidation
- 3With the ignition off, use a multimeter to check that the control wire to the glow relay has no open circuit and is not shorted to ground or supply voltage
- 4If you have diagnostic equipment, read the status of the glow plug control module in live data while glowing is activated
- 5Have a workshop check the glow relay if the wiring is intact
Symptomer du kan merke1
- The engine does not start, at times or all the time
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.