VOLVO
ECM-P068A92 - ECM/PCM Power Relay De-Energized - Too Early. Component Failures. Performance or incorrect operation
System
Motorstyring (ECM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
7 modellerS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V70 (2008–), XC60 (2009–)
Vis modeller per årsmodell og motor (20)
- Volvo S60 (2011–)2011Kun motor: B4164T, B4164T3, B4204T6, B4204T7
- Volvo S60 (2011–)2012–2014Kun motor: B4164T, B4164T2, B4164T3, B4204T7
- Volvo S60 (2011–)2015Kun motor: B4164T, B4164T2, B4164T3
- Volvo S80 (2007–)2010Kun motor: B4204T6
- Volvo S80 (2007–)2011Kun motor: B4164T, B4204T6, B4204T7
- Volvo S80 (2007–)2012–2014Kun motor: B4164T, B4164T2, B4204T6, B4204T7
- Volvo S80 (2007–)2015Kun motor: B4164T
- Volvo V40 (2013–)2013Kun motor: B4164T, B4164T3
- Volvo V40 (2013–)2014–2015Kun motor: B4164T, B4164T3, B4164T4
- Volvo V40 Cross Country (2013–)2013–2015Kun motor: B4164T
- Volvo V60 (2011–)2011Kun motor: B4164T, B4164T3, B4204T6, B4204T7
- Volvo V60 (2011–)2012–2014Kun motor: B4164T, B4164T2, B4164T3, B4204T7
- Volvo V60 (2011–)2015Kun motor: B4164T, B4164T2, B4164T3
- Volvo V70 (2008–)2010Kun motor: B4204T6
- Volvo V70 (2008–)2011Kun motor: B4164T, B4204T6, B4204T7
- Volvo V70 (2008–)2012–2014Kun motor: B4164T, B4164T2, B4204T7
- Volvo V70 (2008–)2015Kun motor: B4164T, B4164T2
- Volvo XC60 (2009–)2010Kun motor: B4204T6
- Volvo XC60 (2009–)2011–2012Kun motor: B4204T6, B4204T7
- Volvo XC60 (2009–)2013–2015Kun motor: B4204T7
Hva betyr feilkoden?
The system relay for the power supply has released too early, that is before the expected time after the ignition was switched off. The control module then does not have time to finish its ongoing work. The fault may be a poor connection, a broken signal wire, a missing supply voltage to the relay or a damaged relay.
Mulige årsaker
- Contact resistance or oxidation in the connectors
- Open circuit in the signal wire
- No supply voltage to the system relay
- Damaged system relay
Hva du kan gjøre
- 1Read and clear the fault code, test-drive and check that the fault does not return after a few ignition switch-offs
- 2Check that the battery is charged and the terminals are secure, since low voltage can cause symptoms
- 3Check the fuses for the system relay supply in the owner's manual
- 4Look at the connectors to the system relay for loose contacts, oxidation and chafing
- 5Use a multimeter to check that the signal wire to the system relay is not open, with the connectors disconnected
- 6If the fault remains, have a workshop check the system relay and its voltage supply
Symptomer du kan merke1
- The battery may have low voltage
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.