VOLVO
ECM-P069071 - ECM/PCM Power Relay Sense Circuit High. Mechanical Failures. Actuator stuck
System
Motorstyring (ECM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
7 modellerS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V70 (2008–), XC60 (2009–)
Vis modeller per årsmodell og motor (20)
- Volvo S60 (2011–)2011Kun motor: B4164T, B4164T3, B4204T6, B4204T7
- Volvo S60 (2011–)2012–2014Kun motor: B4164T, B4164T2, B4164T3, B4204T7
- Volvo S60 (2011–)2015Kun motor: B4164T, B4164T2, B4164T3
- Volvo S80 (2007–)2010Kun motor: B4204T6
- Volvo S80 (2007–)2011Kun motor: B4164T, B4204T6, B4204T7
- Volvo S80 (2007–)2012–2014Kun motor: B4164T, B4164T2, B4204T6, B4204T7
- Volvo S80 (2007–)2015Kun motor: B4164T
- Volvo V40 (2013–)2013Kun motor: B4164T, B4164T3
- Volvo V40 (2013–)2014–2015Kun motor: B4164T, B4164T3, B4164T4
- Volvo V40 Cross Country (2013–)2013–2015Kun motor: B4164T
- Volvo V60 (2011–)2011Kun motor: B4164T, B4164T3, B4204T6, B4204T7
- Volvo V60 (2011–)2012–2014Kun motor: B4164T, B4164T2, B4164T3, B4204T7
- Volvo V60 (2011–)2015Kun motor: B4164T, B4164T2, B4164T3
- Volvo V70 (2008–)2010Kun motor: B4204T6
- Volvo V70 (2008–)2011Kun motor: B4164T, B4204T6, B4204T7
- Volvo V70 (2008–)2012–2014Kun motor: B4164T, B4164T2, B4204T7
- Volvo V70 (2008–)2015Kun motor: B4164T, B4164T2
- Volvo XC60 (2009–)2010Kun motor: B4204T6
- Volvo XC60 (2009–)2011–2012Kun motor: B4204T6, B4204T7
- Volvo XC60 (2009–)2013–2015Kun motor: B4204T7
Hva betyr feilkoden?
The code indicates a mechanical fault where the system relay has stuck and does not release as it should. The sense circuit then shows a signal that is too high to the control module.
Mulige årsaker
- Signal wire short-circuited to ground
- Wiring from the system relay contact short-circuited to voltage
- Damaged system relay
Hva du kan gjøre
- 1Read and clear the fault code, and check whether it returns after a few ignition switch-offs
- 2Listen for a click from the system relay when the ignition is switched off, and note whether it is missing
- 3Check the fuses for the system relay in the owner's manual
- 4Look at the connectors and wiring to the system relay for loose contacts, oxidation and chafing
- 5Use a multimeter to check that the wiring from the system relay contact has no contact with voltage, with the connectors disconnected
- 6If the fault remains, have a workshop check the system relay and the wire to it
Symptomer du kan merke1
- The battery may have low voltage
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.