VOLVO
ECM-P069800 - Sensor Reference Voltage C Circuit Low. General Failure Information. No sub type information
System
Motorstyring (ECM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
9 modellerC30 (2007–2013), S40 (2004–2013), S60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V50 (2004–2013), V60 (2011–), V70 (2008–)
Vis modeller per årsmodell og motor (18)
- Volvo C30 (2007–2013)2011–2013Kun motor: D4162T
- Volvo S40 (2004–2013)2011–2012Kun motor: D4162T
- Volvo S60 (2011–)2011–2012Kun motor: B5254T5, D4162T
- Volvo S60 (2011–)2013–2015Kun motor: D4162T
- Volvo S80 (2007–)2007–2008Kun motor: B5254T6
- Volvo S80 (2007–)2009Kun motor: B5254T6, B5254T8
- Volvo S80 (2007–)2010–2011Kun motor: B5254T10, B5254T11, B5254T8
- Volvo S80 (2007–)2012Kun motor: B5254T10, D4162T
- Volvo S80 (2007–)2013–2015Kun motor: D4162T
- Volvo V40 (2013–)2013–2015Kun motor: D4162T
- Volvo V40 Cross Country (2013–)2013–2015Kun motor: D4162T
- Volvo V50 (2004–2013)2011–2012Kun motor: D4162T
- Volvo V60 (2011–)2011–2015Kun motor: D4162T
- Volvo V70 (2008–)2008Kun motor: B5254T6
- Volvo V70 (2008–)2009Kun motor: B5254T6, B5254T8
- Volvo V70 (2008–)2010–2011Kun motor: B5254T10, B5254T11
- Volvo V70 (2008–)2012Kun motor: B5254T10, D4162T
- Volvo V70 (2008–)2013–2015Kun motor: D4162T
Hva betyr feilkoden?
The control module monitors the reference voltage to the sensors and has found a voltage that is too low in one of the circuits. The fault may lie in a short-circuited wire, a damaged sensor, a weak battery or the charging system.
Mulige årsaker
- Voltage wire to the sensor short-circuited to ground
- Sensor wiring shorted to ground or to voltage
- Damaged sensor
- Battery voltage too low
- Fault in the charging system
- Damaged battery
Hva du kan gjøre
- 1Check that the battery is charged and that the terminals are secure and clean
- 2Read and clear the fault code, and test-drive to see whether it returns
- 3Check the fuses for the sensor supply in the owner's manual
- 4Look at the connectors and wiring to the sensors for loose contacts, corrosion and chafing
- 5Use a multimeter to check that the wiring to the sensors has no contact with ground (the body), with the connectors disconnected
- 6If the fault remains after these checks, have a workshop check the charging system, the sensors and the control module
Symptomer du kan merke4
- Deterioration in vehicle performance
- Starter motor does not turn
- Engine is difficult to start
- Warning symbol and text message in the display
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.