VOLVO
ECM-P06DA00 - Engine Oil Pressure Control Circuit/Open. General Failure Information. No sub type information
System
Motorstyring (ECM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
8 modellerS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Vis modeller per årsmodell og motor (8)
- Volvo S60 (2011–)2014–2015Kun motor: B4204T10, B4204T11, B4204T12, B4204T15, B4204T9, D4204T5
- Volvo S80 (2007–)2014–2015Kun motor: B4204T11, B4204T12, B4204T15, D4204T5
- Volvo V40 (2013–)2015Kun motor: B4204T11, D4204T14
- Volvo V40 Cross Country (2013–)2015Kun motor: B4204T11, D4204T14
- Volvo V60 (2011–)2014–2015Kun motor: B4204T11, B4204T12, B4204T15, B4204T9, D4204T5
- Volvo V70 (2008–)2014–2015Kun motor: B4204T11, D4204T5
- Volvo XC60 (2009–)2014–2015Kun motor: B4204T10, B4204T11, B4204T12, B4204T15, B4204T9, D4204T5
- Volvo XC70 (2008–)2014–2015Kun motor: B4204T11, D4204T5
Hva betyr feilkoden?
The module drives engine oil pressure through the oil pump actuator and monitors it electrically. The code concerns an open circuit to the actuator, and it is set when the control module detects an electrical fault on the actuator or a fault in the wire.
Mulige årsaker
- Open circuit on the signal wire
- The oil pump is defective or worn
Hva du kan gjøre
- 1Read and clear the fault code, and test-drive to see whether it returns
- 2Check the fuses for the oil pump control in the owner's manual
- 3Look at the connector at the oil pump actuator and the wire for loose contacts, oxidation and chafing
- 4Use a multimeter to check that the signal wire is intact between the connectors, with the connectors disconnected
- 5If the fault remains, have a workshop check the oil pump actuator and the oil pump
Symptomer du kan merke1
- No noticeable symptoms for the driver
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.