VOLVO
ECM-P070462 - Clutch Switch Input Circuit. Algorithm Based Failures. Signal compare failure
System
Motorstyring (ECM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
5 modellerS80 (2007–), V70 (2008–), XC60 (2009–), XC70 (2008–), XC90 (2003–)
Vis modeller per årsmodell og motor (8)
- Volvo S80 (2007–)2007–2009Kun motor: D5244T4, D5244T5
- Volvo S80 (2007–)2010–2011Kun motor: D4164T
- Volvo V70 (2008–)2008–2009Kun motor: D5244T4, D5244T5
- Volvo V70 (2008–)2010–2011Kun motor: D4164T
- Volvo XC60 (2009–)2009Alle motorer unntatt: B6304T2
- Volvo XC70 (2008–)2008Alle motorer unntatt: B6324S
- Volvo XC70 (2008–)2009Kun motor: D5244T4, D5244T5
- Volvo XC90 (2003–)2013–2014Kun motor: D5244T18, D5244T5
Hva betyr feilkoden?
The engine control module compares the signals from the clutch pedal position sensor and the position switch. The code is set when the signal from the position sensor is incorrect, and the signals then do not agree with each other.
Mulige årsaker
- Look for the fault cause in the central electronic module (CEM)
Hva du kan gjøre
- 1Read and clear the fault code, and test-drive to see whether it returns
- 2Look at the connectors and wiring at the clutch pedal and the position switch for loose contacts and oxidation
- 3If the fault remains after these checks, have a workshop check the central electronic module (CEM) and the position sensor
Symptomer du kan merke3
- Cruise control cannot be engaged
- Autostart does not work
- Warning symbol and text message in the display
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.