VOLVO
ECM-P07BE62 - Transmission Park Position Sensor/Switch "A" / "B" Correlation. Algorithm Based Failures. Signal compare failure
System
Motorstyring (ECM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
7 modellerS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V70 (2008–), XC60 (2009–)
Vis modeller per årsmodell og motor (20)
- Volvo S60 (2011–)2011Kun motor: B4164T, B4164T3, B4204T6, B4204T7
- Volvo S60 (2011–)2012–2014Kun motor: B4164T, B4164T2, B4164T3, B4204T7
- Volvo S60 (2011–)2015Kun motor: B4164T, B4164T2, B4164T3
- Volvo S80 (2007–)2010Kun motor: B4204T6
- Volvo S80 (2007–)2011Kun motor: B4164T, B4204T6, B4204T7
- Volvo S80 (2007–)2012–2014Kun motor: B4164T, B4164T2, B4204T6, B4204T7
- Volvo S80 (2007–)2015Kun motor: B4164T
- Volvo V40 (2013–)2013Kun motor: B4164T, B4164T3
- Volvo V40 (2013–)2014–2015Kun motor: B4164T, B4164T3, B4164T4
- Volvo V40 Cross Country (2013–)2013–2015Kun motor: B4164T
- Volvo V60 (2011–)2011Kun motor: B4164T, B4164T3, B4204T6, B4204T7
- Volvo V60 (2011–)2012–2014Kun motor: B4164T, B4164T2, B4164T3, B4204T7
- Volvo V60 (2011–)2015Kun motor: B4164T, B4164T2, B4164T3
- Volvo V70 (2008–)2010Kun motor: B4204T6
- Volvo V70 (2008–)2011Kun motor: B4164T, B4204T6, B4204T7
- Volvo V70 (2008–)2012–2014Kun motor: B4164T, B4164T2, B4204T7
- Volvo V70 (2008–)2015Kun motor: B4164T, B4164T2
- Volvo XC60 (2009–)2010Kun motor: B4204T6
- Volvo XC60 (2009–)2011–2012Kun motor: B4204T6, B4204T7
- Volvo XC60 (2009–)2013–2015Kun motor: B4204T7
Hva betyr feilkoden?
The engine control module uses signals from the transmission control module (TCM) to determine which position the selector lever is in, and thereby whether starting the engine is allowed. The code is set when the CAN signal and the signal from the directly connected wire from the selector lever do not agree.
Mulige årsaker
- Look for the fault cause in the transmission control module (TCM)
Hva du kan gjøre
- 1Read and clear the fault code, and check whether it returns when you start in park
- 2Check that the selector lever is firmly seated and that you are in the correct position when starting
- 3Look at the connectors to the selector lever for loose contacts, oxidation and chafing
- 4Use a multimeter to check that the wire from the selector lever is not broken, with the connectors disconnected
- 5If the fault remains, have a workshop read the transmission control module (TCM) and check the selector lever
Symptomer du kan merke1
- Starting and autostart do not work
Hva feilen kan påvirke1
- The signal coming via CAN is used instead
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.