VOLVO
ECM-P080526 - Clutch Position Sensor Circuit. General Signal Failures. Signal rate of change below threshold
System
Motorstyring (ECM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
3 modellerS60 (2011–), S80 (2007–), V70 (2008–)
Vis modeller per årsmodell og motor (9)
- Volvo S60 (2011–)2011–2012Kun motor: B5254T5
- Volvo S80 (2007–)2007–2008Kun motor: B5254T6
- Volvo S80 (2007–)2009Kun motor: B5254T6, B5254T8
- Volvo S80 (2007–)2010–2011Kun motor: B5254T10, B5254T11, B5254T8
- Volvo S80 (2007–)2012Kun motor: B5254T10
- Volvo V70 (2008–)2008Kun motor: B5254T6
- Volvo V70 (2008–)2009Kun motor: B5254T6, B5254T8
- Volvo V70 (2008–)2010–2011Kun motor: B5254T10, B5254T11
- Volvo V70 (2008–)2012Kun motor: B5254T10
Hva betyr feilkoden?
The engine control module checks how the clutch pedal moves using a position sensor and a position switch. The position sensor's signal arrives via the central electronic module (CEM) and over CAN. The code is set when the position sensor value does not add up, and fault-tracing then starts in the CEM.
Mulige årsaker
- Fault-trace the central electronic module (CEM)
Hva du kan gjøre
- 1Read and clear the fault code, and test-drive to see whether auto-start and cruise control work
- 2Look at the connectors at the clutch pedal and the position sensor for loose contacts, oxidation and chafing
- 3Check that the clutch pedal moves freely and does not stick
- 4If you have a diagnostic tool, read the clutch position in live data while you press and release the pedal
- 5If the fault remains, have a workshop read and correct the fault in the central electronic module (CEM)
Symptomer du kan merke2
- Auto-start does not happen
- Cruise control does not work at all
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.