VOLVO
ECM-P080529 - Clutch Position Sensor Circuit. General Signal Failures. Signal signal invalid
System
Motorstyring (ECM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
3 modellerS60 (2011–), S80 (2007–), V70 (2008–)
Vis modeller per årsmodell og motor (9)
- Volvo S60 (2011–)2011–2012Kun motor: B5254T5
- Volvo S80 (2007–)2007–2008Kun motor: B5254T6
- Volvo S80 (2007–)2009Kun motor: B5254T6, B5254T8
- Volvo S80 (2007–)2010–2011Kun motor: B5254T10, B5254T11, B5254T8
- Volvo S80 (2007–)2012Kun motor: B5254T10
- Volvo V70 (2008–)2008Kun motor: B5254T6
- Volvo V70 (2008–)2009Kun motor: B5254T6, B5254T8
- Volvo V70 (2008–)2010–2011Kun motor: B5254T10, B5254T11
- Volvo V70 (2008–)2012Kun motor: B5254T10
Hva betyr feilkoden?
The code is set when the clutch position sensor does not deliver any valid signal. The signal travels via the central electronic module (CEM) and over CAN to the engine control module, and fault-tracing starts there.
Mulige årsaker
- Look for the fault cause in the central electronic module (CEM)
Hva du kan gjøre
- 1Read and clear the fault code and test-drive to see whether it returns
- 2Check that the clutch pedal and its contact are firmly fitted and that the wiring is intact
- 3Look at the connectors at the clutch pedal for loose contacts and oxidation
- 4If the fault remains, have a workshop check the central electronic module (CEM) and the position sensor
Symptomer du kan merke2
- Auto-start does not work
- Cruise control does not function
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.