Hopp til innhold
    OBD Tuning
    SEND TIL OSS
    SEND TIL OSS
    Hjem
    Feilkoder
    VOLVO
    ECM-P081A00
    VOLVO

    ECM-P081A00 - Starter Disable Circuit Low. General Failure Information. No sub type information

    System

    Motorstyring (ECM)

    Volvo-modeller feilkoden gjelder for

    Gjelder følgende modeller:

    6 modeller

    S60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V70 (2008–)

    Vis modeller per årsmodell og motor (11)
    • Volvo S60 (2011–)2011Kun motor: B4164T, B4164T3
    • Volvo S60 (2011–)2012–2015Kun motor: B4164T, B4164T2, B4164T3
    • Volvo S80 (2007–)2011, 2015Kun motor: B4164T
    • Volvo S80 (2007–)2012–2014Kun motor: B4164T, B4164T2
    • Volvo V40 (2013–)2013Kun motor: B4164T, B4164T3
    • Volvo V40 (2013–)2014–2015Kun motor: B4164T, B4164T3, B4164T4
    • Volvo V40 Cross Country (2013–)2013–2015Kun motor: B4164T
    • Volvo V60 (2011–)2011Kun motor: B4164T, B4164T3
    • Volvo V60 (2011–)2012–2015Kun motor: B4164T, B4164T2, B4164T3
    • Volvo V70 (2008–)2011Kun motor: B4164T
    • Volvo V70 (2008–)2012–2015Kun motor: B4164T, B4164T2

    Hva betyr feilkoden?

    The engine control module (ECM) monitors the voltage on the signal wire to the starter relay. The code is set when the voltage lies below a set threshold for a set time, which is treated as a fault. The fault is checked when the engine is started.

    Mulige årsaker

    • Signal wire shorted to earth
    • Break in the signal wire
    • Damaged starter relay
    • Open circuit in the supply feeding the starter motor
    • Damaged control module

    Hva du kan gjøre

    1. 1Check that the fuses are intact. The locations are shown in the instruction manual or on the fuse list
    2. 2Check that the starter relay is intact and firmly fitted in its mounting
    3. 3Check that the connectors at the starter relay and in the wiring are firmly seated and free from play, oxidation and contact resistance
    4. 4Use a multimeter to check that the signal wire to the starter relay has no break and is not shorted to earth (the body)
    5. 5Check that the supply wire to the starter motor has no break. If the fault remains, have a workshop investigate the control module

    Symptomer du kan merke1

    • The engine does not start, either always or on some occasions

    Hva feilen kan påvirke1

    • Only manual starting is possible

    Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.

    OBD Tuning

    Sveriges ledende ekspertsenter for bilelektronikk. Vi tilbyr profesjonell ECU-tuning, reparasjon av styreenheter og diagnostikk med 12 måneders garanti.

    Tjenester

    • Motoroptimalisering
    • ECU Reparasjon
    • Modulkloning
    • Instrumentpanel
    • SRS / Airbag
    • Startsperre

    Database & Diagnostikk

    • ECU-database
    • DTC Feilkodekatalog
    • Diagnoseguider & Måleverdier
    • AI Feilkodeanalysator
    • Nyheter

    ECU-produsenter

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    Selskap

    • Om oss
    • Kontakt
    • Verkstedpartnere
    • Fraktguide
    • Garanti
    • FAQ
    • Vilkår
    • Personvern
    • Nettstedskart

    • Motoroptimalisering
    • ECU Reparasjon
    • Modulkloning
    • Instrumentpanel
    • SRS / Airbag
    • Startsperre

    • ECU-database
    • DTC Feilkodekatalog
    • Diagnoseguider & Måleverdier
    • AI Feilkodeanalysator
    • Nyheter

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    • Om oss
    • Kontakt
    • Verkstedpartnere
    • Fraktguide
    • Garanti
    • FAQ
    • Vilkår
    • Personvern
    • Nettstedskart

    Besøk oss

    Gjuterigatan 29, Karlstad

    Ring oss

    054-830 480

    E-post oss

    service@obdtuning.se

    © 2026 OBD Tuning Karlstad. Alle rettigheter forbeholdt.