Hopp til innhold
    OBD Tuning
    SEND TIL OSS
    SEND TIL OSS
    Hjem
    Feilkoder
    VOLVO
    ECM-P081A11
    VOLVO

    ECM-P081A11 - Starter Disable Circuit Low. General Electrical Failures. Circuit short to ground

    System

    Motorstyring (ECM)

    Volvo-modeller feilkoden gjelder for

    Gjelder følgende modeller:

    5 modeller

    S60 (2011–), S80 (2007–), V60 (2011–), V70 (2008–), XC60 (2009–)

    Vis modeller per årsmodell og motor (12)
    • Volvo S60 (2011–)2011Kun motor: B4204T6, B4204T7
    • Volvo S60 (2011–)2012–2014Kun motor: B4204T7
    • Volvo S80 (2007–)2010Kun motor: B4204T6
    • Volvo S80 (2007–)2011–2014Kun motor: B4204T6, B4204T7
    • Volvo V60 (2011–)2011Kun motor: B4204T6, B4204T7
    • Volvo V60 (2011–)2012–2014Kun motor: B4204T7
    • Volvo V70 (2008–)2010Kun motor: B4204T6
    • Volvo V70 (2008–)2011Kun motor: B4204T6, B4204T7
    • Volvo V70 (2008–)2012–2014Kun motor: B4204T7
    • Volvo XC60 (2009–)2010Kun motor: B4204T6
    • Volvo XC60 (2009–)2011–2012Kun motor: B4204T6, B4204T7
    • Volvo XC60 (2009–)2013–2015Kun motor: B4204T7

    Hva betyr feilkoden?

    The fault concerns a short to earth on the signal wire to the starter relay. The ECM watches the voltage on this wire and sets the code when it stays below a set threshold for a set time. The fault is checked when the engine is started.

    Mulige årsaker

    • Signal wire shorted to earth
    • Chafing, looseness or open circuit in the signal wire
    • Damaged starter relay
    • Open circuit in the feed to the starter motor
    • Damaged control module

    Hva du kan gjøre

    1. 1Check that the fuses are intact. The locations are shown in the instruction manual or on the fuse list
    2. 2Use a multimeter to check that the signal wire to the relay has no contact with earth (the body)
    3. 3Check that the wire has not rubbed against the body or an edge where it passes, and that the connectors are firmly seated
    4. 4Check that the starter relay is intact and firmly fitted in its mounting
    5. 5Read off the fault code, erase it and start the engine to see whether it returns
    6. 6If the fault remains after these checks, have a workshop investigate the engine control module

    Symptomer du kan merke1

    • The engine does not start, and this may happen always or only sometimes

    Hva feilen kan påvirke1

    • Only manual starting is possible

    Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.

    OBD Tuning

    Sveriges ledende ekspertsenter for bilelektronikk. Vi tilbyr profesjonell ECU-tuning, reparasjon av styreenheter og diagnostikk med 12 måneders garanti.

    Tjenester

    • Motoroptimalisering
    • ECU Reparasjon
    • Modulkloning
    • Instrumentpanel
    • SRS / Airbag
    • Startsperre

    Database & Diagnostikk

    • ECU-database
    • DTC Feilkodekatalog
    • Diagnoseguider & Måleverdier
    • AI Feilkodeanalysator
    • Nyheter

    ECU-produsenter

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    Selskap

    • Om oss
    • Kontakt
    • Verkstedpartnere
    • Fraktguide
    • Garanti
    • FAQ
    • Vilkår
    • Personvern
    • Nettstedskart

    • Motoroptimalisering
    • ECU Reparasjon
    • Modulkloning
    • Instrumentpanel
    • SRS / Airbag
    • Startsperre

    • ECU-database
    • DTC Feilkodekatalog
    • Diagnoseguider & Måleverdier
    • AI Feilkodeanalysator
    • Nyheter

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    • Om oss
    • Kontakt
    • Verkstedpartnere
    • Fraktguide
    • Garanti
    • FAQ
    • Vilkår
    • Personvern
    • Nettstedskart

    Besøk oss

    Gjuterigatan 29, Karlstad

    Ring oss

    054-830 480

    E-post oss

    service@obdtuning.se

    © 2026 OBD Tuning Karlstad. Alle rettigheter forbeholdt.