VOLVO
ECM-P082182 - Gear Lever X Position Sensor Circuit. Bus Signal / Message Failures. Alive / sequence counter incorrect / not updated
System
Motorstyring (ECM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
5 modellerS80 (2007–), V70 (2008–), XC60 (2009–), XC70 (2008–), XC90 (2003–)
Vis modeller per årsmodell og motor (6)
- Volvo S80 (2007–)2007–2009Kun motor: D5244T4, D5244T5
- Volvo V70 (2008–)2008–2009Kun motor: D5244T4, D5244T5
- Volvo XC60 (2009–)2009Alle motorer unntatt: B6304T2
- Volvo XC70 (2008–)2008Alle motorer unntatt: B6324S
- Volvo XC70 (2008–)2009Kun motor: D5244T4, D5244T5
- Volvo XC90 (2003–)2013–2014Kun motor: D5244T18, D5244T5
Hva betyr feilkoden?
The code concerns the gear lever X position sensor. The engine control module (ECM) continuously receives the gear selector position from the transmission control module (TCM) over the CAN network. The code is set when that message is missing or wrong, for example when the counter in the message is incorrect or is not updated.
Mulige årsaker
- Fault on the CAN network
- The root cause is in the transmission control module (TCM)
Hva du kan gjøre
- 1Check that the fuses are intact. The locations are shown in the instruction manual or on the fuse list
- 2Read the fault codes in the transmission control module (TCM) first, as the root cause is there
- 3Read the fault codes in the engine control module and check for other CAN-related codes, as the fault may originate in the CAN network
- 4Try moving the gear selector through all positions and check that the car responds as normal
- 5If you have a diagnostic tool, check in live data that the gear selector position changes as you move the selector
- 6If the fault remains, have a workshop investigate the CAN network and the transmission control module (TCM)
Symptomer du kan merke1
- No noticeable symptoms for the driver
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.