Hopp til innhold
    OBD Tuning
    SEND TIL OSS
    SEND TIL OSS
    Hjem
    Feilkoder
    VOLVO
    ECM-P083000
    VOLVO

    ECM-P083000 - Clutch Pedal Switch A Circuit. General Failure Information. No sub type information

    System

    Motorstyring (ECM)

    Volvo-modeller feilkoden gjelder for

    Gjelder følgende modeller:

    9 modeller

    C30 (2007–2013), S40 (2004–2013), S60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V50 (2004–2013), V60 (2011–), V70 (2008–)

    Vis modeller per årsmodell og motor (9)
    • Volvo C30 (2007–2013)2011–2013Kun motor: D4162T
    • Volvo S40 (2004–2013)2011–2012Kun motor: D4162T
    • Volvo S60 (2011–)2011–2015Kun motor: D4162T
    • Volvo S80 (2007–)2012–2015Kun motor: D4162T
    • Volvo V40 (2013–)2013–2015Kun motor: D4162T
    • Volvo V40 Cross Country (2013–)2013–2015Kun motor: D4162T
    • Volvo V50 (2004–2013)2011–2012Kun motor: D4162T
    • Volvo V60 (2011–)2011–2015Kun motor: D4162T
    • Volvo V70 (2008–)2012–2015Kun motor: D4162T

    Hva betyr feilkoden?

    The ECM compares two clutch pedal switches, A and B, with each other. Switch A is wired to the central electronic module (CEM), which passes its signal to the ECM over CAN. The code is set when the signal from switch A does not change despite several speed increases during the same drive.

    Mulige årsaker

    • The root cause is in the central electronic module (CEM)
    • Contact resistance, oxidation or loose connection in the connector
    • Damaged signal wire
    • Damaged clutch pedal position sensor

    Hva du kan gjøre

    1. 1Read the fault codes in the central electronic module (CEM) first, as the root cause is there
    2. 2Check that the fuses are intact. The locations are shown in the instruction manual or on the fuse list
    3. 3Where possible, check functions linked to the clutch pedal on a test drive to establish the status of the fault
    4. 4Check that the clutch pedal moves freely and does not stick, and that the position sensor is firmly fixed and correctly adjusted
    5. 5Check that the connectors at the clutch pedal are firmly seated and free from oxidation and contact resistance
    6. 6If you have a diagnostic tool, check that switch A changes state in live data as the pedal moves. If not, have a workshop investigate the CEM

    Symptomer du kan merke1

    • No noticeable symptoms for the driver

    Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.

    OBD Tuning

    Sveriges ledende ekspertsenter for bilelektronikk. Vi tilbyr profesjonell ECU-tuning, reparasjon av styreenheter og diagnostikk med 12 måneders garanti.

    Tjenester

    • Motoroptimalisering
    • ECU Reparasjon
    • Modulkloning
    • Instrumentpanel
    • SRS / Airbag
    • Startsperre

    Database & Diagnostikk

    • ECU-database
    • DTC Feilkodekatalog
    • Diagnoseguider & Måleverdier
    • AI Feilkodeanalysator
    • Nyheter

    ECU-produsenter

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    Selskap

    • Om oss
    • Kontakt
    • Verkstedpartnere
    • Fraktguide
    • Garanti
    • FAQ
    • Vilkår
    • Personvern
    • Nettstedskart

    • Motoroptimalisering
    • ECU Reparasjon
    • Modulkloning
    • Instrumentpanel
    • SRS / Airbag
    • Startsperre

    • ECU-database
    • DTC Feilkodekatalog
    • Diagnoseguider & Måleverdier
    • AI Feilkodeanalysator
    • Nyheter

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    • Om oss
    • Kontakt
    • Verkstedpartnere
    • Fraktguide
    • Garanti
    • FAQ
    • Vilkår
    • Personvern
    • Nettstedskart

    Besøk oss

    Gjuterigatan 29, Karlstad

    Ring oss

    054-830 480

    E-post oss

    service@obdtuning.se

    © 2026 OBD Tuning Karlstad. Alle rettigheter forbeholdt.