VOLVO
ECM-P083500 - Clutch Pedal Switch "B" Circuit High. General Failure Information. No sub type information
System
Motorstyring (ECM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
11 modellerC30 (2007–2013), S40 (2004–2013), S60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V50 (2004–2013), V60 (2011–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Vis modeller per årsmodell og motor (29)
- Volvo C30 (2007–2013)2011–2013Kun motor: D4162T
- Volvo S40 (2004–2013)2011–2012Kun motor: D4162T
- Volvo S60 (2011–)2011Kun motor: B4164T, B4164T3, D4162T
- Volvo S60 (2011–)2012Alle motorer unntatt: B4204T7, B5254T5, B6304T4
- Volvo S60 (2011–)2013–2014Alle motorer unntatt: B4204T7, B5204T8, B5204T9, B5254T12, B5254T14, B6304T4
- Volvo S60 (2011–)2015Alle motorer unntatt: B5204T8, B5204T9, B5254T12, B5254T14, B6304T3, B6304T4, B6304T5
- Volvo S80 (2007–)2011Kun motor: B4164T
- Volvo S80 (2007–)2012Kun motor: B4164T, B4164T2, D4162T, D5204T3, D5244T11, D5244T15
- Volvo S80 (2007–)2013Kun motor: B4164T, B4164T2, D4162T, D5204T3, D5204T7, D5244T11, D5244T15
- Volvo S80 (2007–)2014Alle motorer unntatt: B4204T6, B4204T7, B5254T12, B5254T14, B6304T4, B6324S4, B6324S5
- Volvo S80 (2007–)2015Alle motorer unntatt: B6304T4, B6324S4, B6324S5
- Volvo V40 (2013–)2013–2014Alle motorer unntatt: B5204T8, B5204T9, B5254T12, B5254T14
- Volvo V40 (2013–)2015Alle motorer unntatt: B5204T8, B5204T9
- Volvo V40 Cross Country (2013–)2013–2014Kun motor: B4164T, D4162T, D5204T4, D5204T6
- Volvo V40 Cross Country (2013–)2015Alle motorer unntatt: B5204T8, B5204T9, B5254T12, B5254T14
- Volvo V50 (2004–2013)2011–2012Kun motor: D4162T
- Volvo V60 (2011–)2011Kun motor: B4164T, B4164T3, D4162T
- Volvo V60 (2011–)2012Alle motorer unntatt: B4204T7, B6304T4
- Volvo V60 (2011–)2013Alle motorer unntatt: B4204T7, B5204T8, B5204T9, B6304T4, D82PHEV
- Volvo V60 (2011–)2014Alle motorer unntatt: B4204T7, B5204T8, B5204T9, B5254T12, B6304T4, D82PHEV
- Volvo V60 (2011–)2015Alle motorer unntatt: B5204T9, B5254T12, B6304T3, B6304T4, B6304T5, D82PHEV, D87PHEV
- Volvo V70 (2008–)2011Kun motor: B4164T
- Volvo V70 (2008–)2012Alle motorer unntatt: B4204T7, B5254T10, B6304T4, B6324S5
- Volvo V70 (2008–)2013–2014Alle motorer unntatt: B4204T7, B5204T9, B6304T4, B6324S5
- Volvo V70 (2008–)2015Alle motorer unntatt: B5204T9, B6304T4
- Volvo XC60 (2009–)2012Kun motor: D5204T3, D5244T11, D5244T15, D5244T17
- Volvo XC60 (2009–)2013–2014Alle motorer unntatt: B4204T7, B6304T4, B6324S4, B6324S5
- Volvo XC60 (2009–)2015Alle motorer unntatt: B4204T7, B5204T9, B5254T12, B5254T14, B6304T4, B6324S4, B6324S5
- Volvo XC70 (2008–)2012–2015Alle motorer unntatt: B6304T4, B6324S4, B6324S5
Hva betyr feilkoden?
Clutch pedal switch B detects the lower end of the pedal's travel, meaning when the pedal is pressed down, and is used to tell whether the pedal is depressed or released for automatic engine stop-start. The code is set when the switch stays active for a long time during driving with a certain gear engaged.
Mulige årsaker
- Contact resistance, oxidation or loose contact in the connector
- Damaged clutch pedal switch B
- Short circuit or break in the connections to the switch
- Damaged signal wire, or a short to voltage on it
- Position switch incorrectly fitted, misadjusted or sticking
- Faulty position switch
Hva du kan gjøre
- 1Check that the fuses are intact. The locations are shown in the instruction manual or on the fuse list
- 2Try automatic stop-start, starting, auto-start and cruise control with the buttons and controls to see whether they are affected
- 3Check that the clutch pedal moves freely, does not stick, and that the connectors at the pedal are firmly seated and free from oxidation
- 4Check that the wiring to switch B has no chafing, crush damage or loose clips, especially where the cable moves
- 5Use a multimeter to check that the wire from switch B has no contact with earth (the body) or positive, and that it has no break
- 6If you have a diagnostic tool, check in live data that switch B changes state as the pedal moves. If the fault remains, have a workshop check the connectors and position switch
Symptomer du kan merke4
- Automatic engine stop-start does not work while driving
- Automatic engine stop-start does not work at idle
- Starting and auto-start do not work
- Cruise control and its disengagement do not work
Hva feilen kan påvirke1
- The automatic engine stop-start function is switched off
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.