VOLVO
ECM-P083F94 - Clutch Pedal Switch A / B Correlation. Component Failures. Unexpected operation
System
Motorstyring (ECM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
7 modellerS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V70 (2008–), XC60 (2009–)
Vis modeller per årsmodell og motor (20)
- Volvo S60 (2011–)2011Kun motor: B4164T, B4164T3, B4204T6, B4204T7
- Volvo S60 (2011–)2012–2014Kun motor: B4164T, B4164T2, B4164T3, B4204T7
- Volvo S60 (2011–)2015Kun motor: B4164T, B4164T2, B4164T3
- Volvo S80 (2007–)2010Kun motor: B4204T6
- Volvo S80 (2007–)2011Kun motor: B4164T, B4204T6, B4204T7
- Volvo S80 (2007–)2012–2014Kun motor: B4164T, B4164T2, B4204T6, B4204T7
- Volvo S80 (2007–)2015Kun motor: B4164T
- Volvo V40 (2013–)2013Kun motor: B4164T, B4164T3
- Volvo V40 (2013–)2014–2015Kun motor: B4164T, B4164T3, B4164T4
- Volvo V40 Cross Country (2013–)2013–2015Kun motor: B4164T
- Volvo V60 (2011–)2011Kun motor: B4164T, B4164T3, B4204T6, B4204T7
- Volvo V60 (2011–)2012–2014Kun motor: B4164T, B4164T2, B4164T3, B4204T7
- Volvo V60 (2011–)2015Kun motor: B4164T, B4164T2, B4164T3
- Volvo V70 (2008–)2010Kun motor: B4204T6
- Volvo V70 (2008–)2011Kun motor: B4164T, B4204T6, B4204T7
- Volvo V70 (2008–)2012–2014Kun motor: B4164T, B4164T2, B4204T7
- Volvo V70 (2008–)2015Kun motor: B4164T, B4164T2
- Volvo XC60 (2009–)2010Kun motor: B4204T6
- Volvo XC60 (2009–)2011–2012Kun motor: B4204T6, B4204T7
- Volvo XC60 (2009–)2013–2015Kun motor: B4204T7
Hva betyr feilkoden?
The code concerns the two clutch pedal sensors, the position sensor and the position switch, and is a component fault with unexpected operation. The engine control module (ECM) compares the two signals, and the code is set when the position sensor shows the pedal as depressed while the position switch is not active.
Mulige årsaker
- Position switch incorrectly fitted, misadjusted or sticking
- Contact resistance, oxidation or loose contact in the connector
- Faulty position switch
Hva du kan gjøre
- 1Read the engine control module fault codes. If any of ECM-U012088, ECM-U000188, ECM-U1A1400, ECM-U000108 or ECM-U000100 is stored, investigate it first
- 2If ECM-U010482, ECM-P193582, ECM-P080582 or ECM-U042600 is stored, investigate it first, as it most likely leads to the root cause
- 3Check that the fuses are intact. The locations are shown in the instruction manual or on the fuse list
- 4Check that the clutch pedal position switch is correctly fitted and correctly adjusted, and that it does not stick
- 5Check that the connectors at the position sensor and position switch are free from contact resistance, oxidation and looseness
- 6If you have a diagnostic tool, check in live data that the sensor and switch states agree as the pedal moves. If not, have a workshop investigate the CEM
Symptomer du kan merke1
- A message and a warning symbol are shown in the display
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.