VOLVO
ECM-P085024 - Park / Neutral Switch Input Circuit. General Signal Failures. Signal stuck high
System
Motorstyring (ECM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
10 modellerS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V60 Cross Country (2015–), V70 (2008–), XC60 (2009–), XC70 (2008–), XC90 (2003–)
Vis modeller per årsmodell og motor (32)
- Volvo S60 (2011–)2011–2012Kun motor: B6304T4
- Volvo S60 (2011–)2013–2014Kun motor: B5204T8, B5204T9, B5254T12, B5254T14, B6304T4
- Volvo S60 (2011–)2015Kun motor: B5204T8, B5204T9, B5254T12, B5254T14, B6304T3, B6304T4, B6304T5
- Volvo S80 (2007–)2007Kun motor: B6324S, B8444S
- Volvo S80 (2007–)2008–2009Kun motor: B6304T2, B6324S, B8444S
- Volvo S80 (2007–)2010Kun motor: B6304T2, B6324S, B6324S2, B8444S
- Volvo S80 (2007–)2011Kun motor: B6304T4, B6324S4, B6324S5, B8444S
- Volvo S80 (2007–)2012, 2015Kun motor: B6304T4, B6324S4, B6324S5
- Volvo S80 (2007–)2013–2014Kun motor: B5254T12, B5254T14, B6304T4, B6324S4, B6324S5
- Volvo V40 (2013–)2013–2014Kun motor: B5204T8, B5204T9, B5254T12, B5254T14
- Volvo V40 (2013–)2015Kun motor: B5204T8, B5204T9
- Volvo V40 Cross Country (2013–)2013–2015Kun motor: B5204T8, B5204T9, B5254T12, B5254T14
- Volvo V60 (2011–)2011–2012Kun motor: B6304T4
- Volvo V60 (2011–)2013Kun motor: B5204T8, B5204T9, B6304T4
- Volvo V60 (2011–)2014Kun motor: B5204T8, B5204T9, B5254T12, B6304T4
- Volvo V60 (2011–)2015Kun motor: B5204T9, B5254T12, B6304T3, B6304T4, B6304T5
- Volvo V60 Cross Country (2015–)2015
- Volvo V70 (2008–)2008–2009Kun motor: B6304T2, B6324S
- Volvo V70 (2008–)2010Kun motor: B6304T2, B6324S, B6324S2
- Volvo V70 (2008–)2011–2012Kun motor: B6304T4, B6324S5
- Volvo V70 (2008–)2013–2014Kun motor: B5204T9, B6304T4, B6324S5
- Volvo V70 (2008–)2015Kun motor: B5204T9, B6304T4
- Volvo XC60 (2009–)2009Kun motor: B6304T2
- Volvo XC60 (2009–)2010Kun motor: B6304T2, B6324S, B6324S2
- Volvo XC60 (2009–)2011–2014Kun motor: B6304T4, B6324S4, B6324S5
- Volvo XC60 (2009–)2015Kun motor: B5204T9, B5254T12, B5254T14, B6304T4, B6324S4, B6324S5
- Volvo XC70 (2008–)2008Kun motor: B6324S
- Volvo XC70 (2008–)2009Kun motor: B6304T2, B6324S
- Volvo XC70 (2008–)2010Kun motor: B6304T2, B6324S, B6324S2
- Volvo XC70 (2008–)2011–2015Kun motor: B6304T4, B6324S4, B6324S5
- Volvo XC90 (2003–)2007–2010Kun motor: B6324S
- Volvo XC90 (2003–)2011–2014Kun motor: B6324S5
Hva betyr feilkoden?
The code concerns the gear selector's directly connected wire, which is stuck in a state that does not match the CAN signal from the transmission control module (TCM). The engine control module (ECM) compares the two signals, and the code is set when the CAN signal shows that starting is allowed while the wire shows the opposite. The fault is checked with the ignition in position II.
Mulige årsaker
- The root cause is in the transmission control module (TCM)
Hva du kan gjøre
- 1Read the fault codes in the transmission control module (TCM) first, as the root cause is there
- 2Check that the fuses are intact. The locations are shown in the instruction manual or on the fuse list
- 3Try starting and auto-start with the buttons and controls to see whether they are affected
- 4If you have a diagnostic tool, check in live data whether the direct selector signal and the CAN signal agree as you move the selector
- 5If the fault returns, have a workshop investigate the gear selector wiring and the transmission control module (TCM)
Symptomer du kan merke4
- Auto-start is lost or does not work
- Engine starting is delayed or hesitant
- The engine is hard to start and cranks slowly, sometimes or always
- The engine does not start, sometimes or always
Hva feilen kan påvirke1
- The ECM uses the signal received over CAN instead
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.