VOLVO
ECM-P085100 - Park / Neutral Switch Input Circuit Low. General Failure Information. No sub type information
System
Motorstyring (ECM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
8 modellerS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Vis modeller per årsmodell og motor (8)
- Volvo S60 (2011–)2014–2015Kun motor: B4204T10, B4204T11, B4204T12, B4204T15, B4204T9, D4204T5
- Volvo S80 (2007–)2014–2015Kun motor: B4204T11, B4204T12, B4204T15, D4204T5
- Volvo V40 (2013–)2015Kun motor: B4204T11, D4204T14
- Volvo V40 Cross Country (2013–)2015Kun motor: B4204T11, D4204T14
- Volvo V60 (2011–)2014–2015Kun motor: B4204T11, B4204T12, B4204T15, B4204T9, D4204T5
- Volvo V70 (2008–)2014–2015Kun motor: B4204T11, D4204T5
- Volvo XC60 (2009–)2014–2015Kun motor: B4204T10, B4204T11, B4204T12, B4204T15, B4204T9, D4204T5
- Volvo XC70 (2008–)2014–2015Kun motor: B4204T11, D4204T5
Hva betyr feilkoden?
The code means that the direct wire from the gear selector says starting is allowed, while the CAN signal from the transmission control module (TCM) says the opposite. The engine control module (ECM) uses the selector positions to decide whether engine start is allowed, and the fault is checked with the ignition on.
Mulige årsaker
- The root cause is in the transmission control module (TCM)
Hva du kan gjøre
- 1Begin in the transmission control module (TCM) by reading off and remedying its fault codes
- 2Erase this code last, once the root cause in the TCM has been remedied and its fault code erased
- 3Check that the fuses are intact. The locations are shown in the instruction manual or on the fuse list
- 4Use a multimeter to check that the wire from the gear selector has no break and no contact with earth or voltage
- 5If the fault remains after these checks, have a workshop investigate the transmission control module (TCM)
Symptomer du kan merke2
- The engine is hard to start and cranks slowly, either always or on some occasions
- The engine does not start, either always or on some occasions
Hva feilen kan påvirke1
- The ECM uses the signal received over CAN instead
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.