Hopp til innhold
    OBD Tuning
    SEND TIL OSS
    SEND TIL OSS
    Hjem
    Feilkoder
    VOLVO
    ECM-P085200
    VOLVO

    ECM-P085200 - Park / Neutral Switch Input Circuit High. General Failure Information. No sub type information

    System

    Motorstyring (ECM)

    Volvo-modeller feilkoden gjelder for

    Gjelder følgende modeller:

    8 modeller

    S60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V70 (2008–), XC60 (2009–), XC70 (2008–)

    Vis modeller per årsmodell og motor (8)
    • Volvo S60 (2011–)2014–2015Kun motor: B4204T10, B4204T11, B4204T12, B4204T15, B4204T9, D4204T5
    • Volvo S80 (2007–)2014–2015Kun motor: B4204T11, B4204T12, B4204T15, D4204T5
    • Volvo V40 (2013–)2015Kun motor: B4204T11, D4204T14
    • Volvo V40 Cross Country (2013–)2015Kun motor: B4204T11, D4204T14
    • Volvo V60 (2011–)2014–2015Kun motor: B4204T11, B4204T12, B4204T15, B4204T9, D4204T5
    • Volvo V70 (2008–)2014–2015Kun motor: B4204T11, D4204T5
    • Volvo XC60 (2009–)2014–2015Kun motor: B4204T10, B4204T11, B4204T12, B4204T15, B4204T9, D4204T5
    • Volvo XC70 (2008–)2014–2015Kun motor: B4204T11, D4204T5

    Hva betyr feilkoden?

    The code means that the CAN signal from the TCM says starting is allowed, while the signal on the wire from the gear selector says the opposite. The engine control module monitors this to decide whether engine start is allowed, and the fault is checked with the ignition on.

    Mulige årsaker

    • The root cause is in the transmission control module (TCM)

    Hva du kan gjøre

    1. 1Look for the root cause in the transmission control module (TCM): read off and remedy its fault codes there first
    2. 2Check that the fuses are intact. The locations are shown in the instruction manual or on the fuse list
    3. 3If you have a diagnostic tool, check in live data that the selector position agrees with the CAN signal as you move the selector between P/N and other positions
    4. 4If the fault remains, have a workshop investigate the TCM, where the cause is given as lying

    Symptomer du kan merke2

    • The starter drags the engine round slowly and it starts with difficulty
    • The engine does not start, at some times or all the time

    Hva feilen kan påvirke1

    • The ECM uses the signal received over CAN instead

    Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.

    OBD Tuning

    Sveriges ledende ekspertsenter for bilelektronikk. Vi tilbyr profesjonell ECU-tuning, reparasjon av styreenheter og diagnostikk med 12 måneders garanti.

    Tjenester

    • Motoroptimalisering
    • ECU Reparasjon
    • Modulkloning
    • Instrumentpanel
    • SRS / Airbag
    • Startsperre

    Database & Diagnostikk

    • ECU-database
    • DTC Feilkodekatalog
    • Diagnoseguider & Måleverdier
    • AI Feilkodeanalysator
    • Nyheter

    ECU-produsenter

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    Selskap

    • Om oss
    • Kontakt
    • Verkstedpartnere
    • Fraktguide
    • Garanti
    • FAQ
    • Vilkår
    • Personvern
    • Nettstedskart

    • Motoroptimalisering
    • ECU Reparasjon
    • Modulkloning
    • Instrumentpanel
    • SRS / Airbag
    • Startsperre

    • ECU-database
    • DTC Feilkodekatalog
    • Diagnoseguider & Måleverdier
    • AI Feilkodeanalysator
    • Nyheter

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    • Om oss
    • Kontakt
    • Verkstedpartnere
    • Fraktguide
    • Garanti
    • FAQ
    • Vilkår
    • Personvern
    • Nettstedskart

    Besøk oss

    Gjuterigatan 29, Karlstad

    Ring oss

    054-830 480

    E-post oss

    service@obdtuning.se

    © 2026 OBD Tuning Karlstad. Alle rettigheter forbeholdt.