VOLVO
ECM-P086B00 - Neutral Position Sensor "A" Circuit Range/Performance. General Failure Information. No sub type information
System
Motorstyring (ECM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
11 modellerC30 (2007–2013), S40 (2004–2013), S60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V50 (2004–2013), V60 (2011–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Vis modeller per årsmodell og motor (33)
- Volvo C30 (2007–2013)2011–2013Kun motor: D4162T
- Volvo S40 (2004–2013)2011–2012Kun motor: D4162T
- Volvo S60 (2011–)2011Kun motor: B4164T, B4164T3, D4162T
- Volvo S60 (2011–)2012Alle motorer unntatt: B4204T7, B5254T5, B6304T4
- Volvo S60 (2011–)2013Alle motorer unntatt: B4204T7, B5204T8, B5204T9, B5254T12, B5254T14, B6304T4
- Volvo S60 (2011–)2014Kun motor: B4164T, B4164T2, B4164T3, D4162T, D4204T5, D5204T3, D5204T7, D5244T11, D5244T15
- Volvo S60 (2011–)2015Kun motor: B4164T, B4164T2, B4164T3, D4162T, D4204T5, D5204T3, D5204T7, D5244T11, D5244T15, D5244T23
- Volvo S80 (2007–)2011Kun motor: B4164T
- Volvo S80 (2007–)2012Kun motor: B4164T, B4164T2, D4162T, D5204T3, D5244T11, D5244T15
- Volvo S80 (2007–)2013Kun motor: B4164T, B4164T2, D4162T, D5204T3, D5204T7, D5244T11, D5244T15
- Volvo S80 (2007–)2014Kun motor: B4164T, B4164T2, D4162T, D4204T5, D5204T3, D5204T7, D5244T11, D5244T15
- Volvo S80 (2007–)2015Kun motor: B4164T, D4162T, D4204T5, D5204T3, D5244T15
- Volvo V40 (2013–)2013–2014Alle motorer unntatt: B5204T8, B5204T9, B5254T12, B5254T14
- Volvo V40 (2013–)2015Alle motorer unntatt: B4204T11, B5204T8, B5204T9
- Volvo V40 Cross Country (2013–)2013–2014Kun motor: B4164T, D4162T, D5204T4, D5204T6
- Volvo V40 Cross Country (2013–)2015Kun motor: B4164T, D4162T, D4204T14, D5204T6
- Volvo V50 (2004–2013)2011–2012Kun motor: D4162T
- Volvo V60 (2011–)2011Kun motor: B4164T, B4164T3, D4162T
- Volvo V60 (2011–)2012Alle motorer unntatt: B4204T7, B6304T4
- Volvo V60 (2011–)2013Alle motorer unntatt: B4204T7, B5204T8, B5204T9, B6304T4
- Volvo V60 (2011–)2014Alle motorer unntatt: B4204T11, B4204T12, B4204T15, B4204T7, B4204T9, B5204T8, B5204T9, B5254T12, B6304T4
- Volvo V60 (2011–)2015Alle motorer unntatt: B4204T11, B4204T12, B4204T15, B4204T9, B5204T9, B5254T12, B6304T3, B6304T4, B6304T5
- Volvo V70 (2008–)2011Kun motor: B4164T
- Volvo V70 (2008–)2012Alle motorer unntatt: B4204T7, B5254T10, B6304T4, B6324S5
- Volvo V70 (2008–)2013Alle motorer unntatt: B4204T7, B5204T9, B6304T4, B6324S5
- Volvo V70 (2008–)2014Alle motorer unntatt: B4204T11, B4204T7, B5204T9, B6304T4, B6324S5
- Volvo V70 (2008–)2015Alle motorer unntatt: B4204T11, B5204T9, B6304T4
- Volvo XC60 (2009–)2012Kun motor: D5204T3, D5244T11, D5244T15, D5244T17
- Volvo XC60 (2009–)2013Alle motorer unntatt: B4204T7, B6304T4, B6324S4, B6324S5
- Volvo XC60 (2009–)2014Kun motor: D4204T5, D5204T3, D5204T7, D5244T11, D5244T12, D5244T15, D5244T17
- Volvo XC60 (2009–)2015Kun motor: D4204T5, D5204T3, D5204T7, D5244T11, D5244T12, D5244T15, D5244T17, D5244T23
- Volvo XC70 (2008–)2012–2013Alle motorer unntatt: B6304T4, B6324S4, B6324S5
- Volvo XC70 (2008–)2014–2015Alle motorer unntatt: B4204T11, B6304T4, B6324S4, B6324S5
Hva betyr feilkoden?
Neutral position sensor A measures the angle through which the gear lever turns the input shaft to the gearbox. During a gear change its voltage should change in a set pattern, but here it does not change at all or varies only within a small range. There is a main sensor and a backup redundancy sensor, and the fault concerns the main sensor's signal.
Mulige årsaker
- Loose contact or oxidation in the connector
- Short circuit or break in the wiring to the sensor
- Sensor incorrectly fitted to the gearbox
- Damaged link arm that the sensor is attached to
- Magnet damaged or in the wrong position
- Damaged neutral position sensor
Hva du kan gjøre
- 1Check that the fuses are intact. The locations are shown in the instruction manual or on the fuse list
- 2Check that the connector at the neutral position sensor is firmly seated and free from looseness and oxidation
- 3Check that the link arm and sensor are firmly fixed and undamaged, and that the sensor is correctly positioned on the gearbox
- 4Use a multimeter to check that the signal wire to the sensor has no break and is not shorted to earth
- 5If you have a diagnostic tool, check in live data that the sensor value changes clearly as the gear lever is moved between positions on a test drive
- 6If the fault remains, have a workshop check the sensor and its magnet
Symptomer du kan merke3
- Automatic engine stop-start does not work while driving
- Automatic engine stop-start does not work at idle
- Starting and auto-start do not work
Hva feilen kan påvirke1
- The automatic engine stop-start function is switched off
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.