Hopp til innhold
    OBD Tuning
    SEND TIL OSS
    SEND TIL OSS
    Hjem
    Feilkoder
    VOLVO
    ECM-P086D00
    VOLVO

    ECM-P086D00 - Neutral Position Sensor "A" Circuit High. General Failure Information. No sub type information

    System

    Motorstyring (ECM)

    Volvo-modeller feilkoden gjelder for

    Gjelder følgende modeller:

    11 modeller

    C30 (2007–2013), S40 (2004–2013), S60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V50 (2004–2013), V60 (2011–), V70 (2008–), XC60 (2009–), XC70 (2008–)

    Vis modeller per årsmodell og motor (29)
    • Volvo C30 (2007–2013)2011–2013Kun motor: D4162T
    • Volvo S40 (2004–2013)2011–2012Kun motor: D4162T
    • Volvo S60 (2011–)2011Kun motor: B4164T, B4164T3, D4162T
    • Volvo S60 (2011–)2012Alle motorer unntatt: B4204T7, B5254T5, B6304T4
    • Volvo S60 (2011–)2013–2014Alle motorer unntatt: B4204T7, B5204T8, B5204T9, B5254T12, B5254T14, B6304T4
    • Volvo S60 (2011–)2015Alle motorer unntatt: B5204T8, B5204T9, B5254T12, B5254T14, B6304T3, B6304T4, B6304T5
    • Volvo S80 (2007–)2011Kun motor: B4164T
    • Volvo S80 (2007–)2012Kun motor: B4164T, B4164T2, D4162T, D5204T3, D5244T11, D5244T15
    • Volvo S80 (2007–)2013Kun motor: B4164T, B4164T2, D4162T, D5204T3, D5204T7, D5244T11, D5244T15
    • Volvo S80 (2007–)2014Alle motorer unntatt: B4204T6, B4204T7, B5254T12, B5254T14, B6304T4, B6324S4, B6324S5
    • Volvo S80 (2007–)2015Alle motorer unntatt: B6304T4, B6324S4, B6324S5
    • Volvo V40 (2013–)2013–2014Alle motorer unntatt: B5204T8, B5204T9, B5254T12, B5254T14
    • Volvo V40 (2013–)2015Alle motorer unntatt: B5204T8, B5204T9
    • Volvo V40 Cross Country (2013–)2013–2014Kun motor: B4164T, D4162T, D5204T4, D5204T6
    • Volvo V40 Cross Country (2013–)2015Alle motorer unntatt: B5204T8, B5204T9, B5254T12, B5254T14
    • Volvo V50 (2004–2013)2011–2012Kun motor: D4162T
    • Volvo V60 (2011–)2011Kun motor: B4164T, B4164T3, D4162T
    • Volvo V60 (2011–)2012Alle motorer unntatt: B4204T7, B6304T4
    • Volvo V60 (2011–)2013Alle motorer unntatt: B4204T7, B5204T8, B5204T9, B6304T4, D82PHEV
    • Volvo V60 (2011–)2014Alle motorer unntatt: B4204T7, B5204T8, B5204T9, B5254T12, B6304T4, D82PHEV
    • Volvo V60 (2011–)2015Alle motorer unntatt: B5204T9, B5254T12, B6304T3, B6304T4, B6304T5, D82PHEV, D87PHEV
    • Volvo V70 (2008–)2011Kun motor: B4164T
    • Volvo V70 (2008–)2012Alle motorer unntatt: B4204T7, B5254T10, B6304T4, B6324S5
    • Volvo V70 (2008–)2013–2014Alle motorer unntatt: B4204T7, B5204T9, B6304T4, B6324S5
    • Volvo V70 (2008–)2015Alle motorer unntatt: B5204T9, B6304T4
    • Volvo XC60 (2009–)2012Kun motor: D5204T3, D5244T11, D5244T15, D5244T17
    • Volvo XC60 (2009–)2013–2014Alle motorer unntatt: B4204T7, B6304T4, B6324S4, B6324S5
    • Volvo XC60 (2009–)2015Alle motorer unntatt: B4204T7, B5204T9, B5254T12, B5254T14, B6304T4, B6324S4, B6324S5
    • Volvo XC70 (2008–)2012–2015Alle motorer unntatt: B6304T4, B6324S4, B6324S5

    Hva betyr feilkoden?

    The signal from the main sensor of neutral position sensor A is too high. The fault may be caused by the signal wire or the connector being shorted to voltage, or by a damaged sensor. The sensor has a redundancy sensor as a backup, and the fault is checked with the ignition on.

    Mulige årsaker

    • Loose contact or oxidation in the connector
    • Signal wire shorted to voltage
    • Damaged neutral position sensor
    • Connector shorted to voltage

    Hva du kan gjøre

    1. 1Check that the fuses are intact. The locations are shown in the instruction manual or on the fuse list
    2. 2Check that the connector at the neutral position sensor is firmly seated and free from oxidation and looseness
    3. 3Use a multimeter to check that the signal wire has no contact with the battery positive and has no break
    4. 4Try automatic stop-start with the buttons and controls to see whether the function works
    5. 5If you have a diagnostic tool, check in live data that the sensor value changes when the gear lever is moved, instead of staying too high
    6. 6If the fault remains after these checks, have a workshop check the sensor and the wiring to it

    Symptomer du kan merke2

    • Automatic engine stop-start does not work while driving and at idle
    • Starting and auto-start do not work

    Hva feilen kan påvirke1

    • The automatic engine stop-start function is switched off

    Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.

    OBD Tuning

    Sveriges ledende ekspertsenter for bilelektronikk. Vi tilbyr profesjonell ECU-tuning, reparasjon av styreenheter og diagnostikk med 12 måneders garanti.

    Tjenester

    • Motoroptimalisering
    • ECU Reparasjon
    • Modulkloning
    • Instrumentpanel
    • SRS / Airbag
    • Startsperre

    Database & Diagnostikk

    • ECU-database
    • DTC Feilkodekatalog
    • Diagnoseguider & Måleverdier
    • AI Feilkodeanalysator
    • Nyheter

    ECU-produsenter

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    Selskap

    • Om oss
    • Kontakt
    • Verkstedpartnere
    • Fraktguide
    • Garanti
    • FAQ
    • Vilkår
    • Personvern
    • Nettstedskart

    • Motoroptimalisering
    • ECU Reparasjon
    • Modulkloning
    • Instrumentpanel
    • SRS / Airbag
    • Startsperre

    • ECU-database
    • DTC Feilkodekatalog
    • Diagnoseguider & Måleverdier
    • AI Feilkodeanalysator
    • Nyheter

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    • Om oss
    • Kontakt
    • Verkstedpartnere
    • Fraktguide
    • Garanti
    • FAQ
    • Vilkår
    • Personvern
    • Nettstedskart

    Besøk oss

    Gjuterigatan 29, Karlstad

    Ring oss

    054-830 480

    E-post oss

    service@obdtuning.se

    © 2026 OBD Tuning Karlstad. Alle rettigheter forbeholdt.