VOLVO
ECM-P08A862 - Clutch Pedal Position Sensor Circuit Range/Performance. Algorithm Based Failures. Signal compare failure
System
Motorstyring (ECM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
8 modellerS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Vis modeller per årsmodell og motor (8)
- Volvo S60 (2011–)2014–2015Kun motor: B4204T10, B4204T11, B4204T12, B4204T15, B4204T9, D4204T5
- Volvo S80 (2007–)2014–2015Kun motor: B4204T11, B4204T12, B4204T15, D4204T5
- Volvo V40 (2013–)2015Kun motor: B4204T11, D4204T14
- Volvo V40 Cross Country (2013–)2015Kun motor: B4204T11, D4204T14
- Volvo V60 (2011–)2014–2015Kun motor: B4204T11, B4204T12, B4204T15, B4204T9, D4204T5
- Volvo V70 (2008–)2014–2015Kun motor: B4204T11, D4204T5
- Volvo XC60 (2009–)2014–2015Kun motor: B4204T10, B4204T11, B4204T12, B4204T15, B4204T9, D4204T5
- Volvo XC70 (2008–)2014–2015Kun motor: B4204T11, D4204T5
Hva betyr feilkoden?
The code means that two sensors do not agree, which the engine control module detects by comparing them. Both sensors are directly connected to the engine control module, and the fault is checked while driving. The fault may come from how the clutch is used.
Mulige årsaker
- Many gear changes made without pressing the clutch pedal down far enough
- Long driving with the clutch pedal held down
- Contact resistance, oxidation or loose contact in the connector
- Damaged signal wire
- Damaged clutch pedal sensor
Hva du kan gjøre
- 1Check how the clutch pedal is used: many gear changes without pressing it down far enough, or long driving with it held down, can cause the fault
- 2Check that the fuses are intact. The locations are shown in the instruction manual or on the fuse list
- 3Check that the connectors at the clutch pedal are free from oxidation and contact resistance, and that they are firmly seated
- 4Use a multimeter to check that the signal wire from the sensor has no break and no contact with earth (the body)
- 5If the fault remains after these checks, have a workshop investigate the clutch pedal sensor
Symptomer du kan merke5
- Starting and auto-start do not work
- Automatic engine stop-start does not work, both at idle and while driving
- The car may hesitate, surge or run jerkily while driving, even at constant speed
- A message and a warning symbol are shown in the display
- Cruise control cannot be engaged
Hva feilen kan påvirke1
- The automatic engine stop-start function is switched off
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.