VOLVO
ECM-P08AE00 - Neutral Position Sensor "B" Circuit Range/Performance. General Failure Information. No sub type information
System
Motorstyring (ECM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
8 modellerS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Vis modeller per årsmodell og motor (8)
- Volvo S60 (2011–)2014–2015Kun motor: D4204T5
- Volvo S80 (2007–)2014–2015Kun motor: D4204T5
- Volvo V40 (2013–)2015Kun motor: D4204T14
- Volvo V40 Cross Country (2013–)2015Kun motor: D4204T14
- Volvo V60 (2011–)2014–2015Kun motor: D4204T5
- Volvo V70 (2008–)2014–2015Kun motor: D4204T5
- Volvo XC60 (2009–)2014–2015Kun motor: D4204T5
- Volvo XC70 (2008–)2014–2015Kun motor: D4204T5
Hva betyr feilkoden?
Neutral position sensor B measures the angle at which the gear lever turns the input shaft to the gearbox, and the engine control module uses it while automatic stop-start is active. The code is set when the character of the signal from the sensor is wrong.
Mulige årsaker
- Damaged neutral position sensor B
Hva du kan gjøre
- 1Check that the fuses are intact. The locations are shown in the instruction manual or on the fuse list
- 2Check that the connector at neutral position sensor B is firmly seated and free from oxidation and looseness
- 3Check that the sensor is firmly fixed to the gearbox and is not damaged
- 4If you have a diagnostic tool, check in live data that the value for sensor B changes smoothly as the gear lever is moved between positions
- 5If the fault remains after these checks, have a workshop investigate neutral position sensor B
Symptomer du kan merke3
- Automatic engine stop-start does not work while driving
- Automatic engine stop-start does not work at idle
- Starting and auto-start do not work
Hva feilen kan påvirke1
- The automatic engine stop-start function is switched off
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.