VOLVO
ECM-P0A0F01 - Engine Failed to Start. General Failure Information. General electrical failure
System
Motorstyring (ECM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
5 modellerS80 (2007–), V70 (2008–), XC60 (2009–), XC70 (2008–), XC90 (2003–)
Vis modeller per årsmodell og motor (6)
- Volvo S80 (2007–)2007–2009Kun motor: D5244T4, D5244T5
- Volvo V70 (2008–)2008–2009Kun motor: D5244T4, D5244T5
- Volvo XC60 (2009–)2009Alle motorer unntatt: B6304T2
- Volvo XC70 (2008–)2008Alle motorer unntatt: B6324S
- Volvo XC70 (2008–)2009Kun motor: D5244T4, D5244T5
- Volvo XC90 (2003–)2013–2014Kun motor: D5244T18, D5244T5
Hva betyr feilkoden?
The engine control module monitors the engine's operating phases internally, and the code is set when the engine braking indication is wrong. The fault lies in the engine control module itself, and it is checked with the ignition on.
Mulige årsaker
- Internal fault in the engine control module
Hva du kan gjøre
- 1Check that the fuses are intact. The locations are shown in the instruction manual or on the fuse list
- 2Switch the ignition on and read off the diagnostic status and fault status for the code
- 3Check whether the fault is still active. If it is, have a workshop investigate the engine control module
- 4Where possible, check on a test drive that starting and idling work normally, to establish the status of the fault
Symptomer du kan merke1
- No noticeable symptoms for the driver
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.