VOLVO
ECM-P0A1000 - DC/DC Converter Status Circuit High. General Failure Information. No sub type information
System
Motorstyring (ECM)
Volvo-modeller feilkoden gjelder for
Feilkoden har ulik betydning avhengig av modell, årsmodell eller motor. Velg betydningen som gjelder din bil.
Gjelder følgende modeller:
9 modellerC30 (2007–2013), S40 (2004–2013), S60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V50 (2004–2013), V60 (2011–), V70 (2008–)
Vis modeller per årsmodell og motor (9)
- Volvo C30 (2007–2013)2011–2013Kun motor: D4162T
- Volvo S40 (2004–2013)2011–2012Kun motor: D4162T
- Volvo S60 (2011–)2011–2015Kun motor: D4162T
- Volvo S80 (2007–)2012–2015Kun motor: D4162T
- Volvo V40 (2013–)2013–2015Kun motor: D4162T
- Volvo V40 Cross Country (2013–)2013–2015Kun motor: D4162T
- Volvo V50 (2004–2013)2011–2012Kun motor: D4162T
- Volvo V60 (2011–)2011–2015Kun motor: D4162T
- Volvo V70 (2008–)2012–2015Kun motor: D4162T
Hva betyr feilkoden?
The engine control module monitors the status circuit of the converter and sets the code when the voltage there is too high. The engine control module itself is given as the cause, and the fault is tested with the engine running.
Mulige årsaker
- Damaged engine control module
Hva du kan gjøre
- 1After the engine has run for a while, read off the fault code status and check whether the fault is still active
- 2Check that the fuses are intact. The locations are shown in the instruction manual or on the fuse list
- 3If the fault remains, have a workshop investigate the engine control module
- 4Do not work on the converter or the engine control module yourself. This is a workshop task
Symptomer du kan merke1
- The check engine lamp lights or behaves abnormally
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.