VOLVO
ECM-P0CDF00 - Hybrid/EV Battery Pack Coolant Control Valve "A" Control Circuit/Open. General Failure Information. No sub type information
System
Motorstyring (ECM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
1 modellV60 (2011–)
Vis modeller per årsmodell og motor (2)
Hva betyr feilkoden?
The engine control module continuously monitors the valve for battery cooling in the hybrid battery pack. The code is set when the signal wire between the engine control module and the valve is shorted or has a break, and the fault is checked with the ignition on.
Mulige årsaker
- Damaged valve
- Short circuit or break in the wiring to the valve
Hva du kan gjøre
- 1Check that the fuses are intact. The locations are shown in the instruction manual or on the fuse list
- 2Where possible, check on a test drive that the air conditioning and temperature control work, to establish the status of the fault
- 3Read off the fault code with the ignition on and check whether the fault is still active
- 4Have a workshop check the valve and its wiring, as electrical work on the hybrid system is a workshop task
- 5Do not work on the hybrid system yourself
Symptomer du kan merke3
- Temperature control and air conditioning do not work
- The combustion engine is active in HYBRID mode more often than normal, or all the time
- A message and a warning symbol are shown in the display
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.