VOLVO
ECM-P0CEA9A - Hybrid/EV Electronics Coolant Pump Performance. Component Failures. Component or system operating conditions
System
Motorstyring (ECM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
1 modellV60 (2011–)
Vis modeller per årsmodell og motor (2)
Hva betyr feilkoden?
The code concerns the operating state of the pump. It is set when the signal wire to the coolant pump is shorted or has a break, or when the pump has another fault that prevents cooling.
Mulige årsaker
- Damaged pump
- Short circuit or break in the wiring to the pump
Hva du kan gjøre
- 1Read off the fault code with the ignition on and check whether it is active
- 2Where possible, check on a test drive that HYBRID mode works normally, to establish the status of the fault
- 3Check that the fuses are intact. The locations are shown in the instruction manual or on the fuse list
- 4Have a workshop investigate the pump if the fault code remains
Symptomer du kan merke2
- The combustion engine is active in HYBRID mode more often than normal, or all the time
- A message and a warning symbol are shown in the display
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.