VOLVO
ECM-P110300 - Mass Air Flow Sensor In Range But Higher Than Expected. General Failure Information. No sub type information
System
Motorstyring (ECM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
2 modellerS80 (2007–), V70 (2008–)
Vis modeller per årsmodell og motor (2)
Hva betyr feilkoden?
The mass air flow sensor signal lies within its range but is higher than the engine control module expects. The module compares the signal with the sensor's characteristic, and the code is set when the signal does not follow it.
Mulige årsaker
- Air leak in the intake system
- Loose contact, contact resistance or oxidation in the connections
- Signal wire shorted to voltage
- Damaged mass air flow sensor
Hva du kan gjøre
- 1Check that the fuses are intact. The locations are shown in the instruction manual or on the fuse list
- 2Look for an air leak in the engine's intake system, for example at hoses and connections
- 3Check that the connector at the mass air flow sensor is firmly seated and free from looseness, contact resistance and oxidation
- 4Use a multimeter to check that the signal wire from the sensor has no contact with the battery positive
- 5If the fault remains after these checks, have a workshop with diagnostic equipment check the mass air flow sensor
Symptomer du kan merke1
- The check engine lamp lights or behaves abnormally
Hva feilen kan påvirke1
- The engine control module calculates an air mass instead of using the sensor's value
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.