Hopp til innhold
    OBD Tuning
    SEND TIL OSS
    SEND TIL OSS
    Hjem
    Feilkoder
    VOLVO
    ECM-P112452
    VOLVO

    ECM-P112452 - Throttle Position Sensor A Out Of Self Test Range. System Programming Failures. Not activated

    System

    Motorstyring (ECM)

    Volvo-modeller feilkoden gjelder for

    Gjelder følgende modeller:

    3 modeller

    S60 (2011–), S80 (2007–), V70 (2008–)

    Vis modeller per årsmodell og motor (9)
    • Volvo S60 (2011–)2011–2012Kun motor: B5254T5
    • Volvo S80 (2007–)2007–2008Kun motor: B5254T6
    • Volvo S80 (2007–)2009Kun motor: B5254T6, B5254T8
    • Volvo S80 (2007–)2010–2011Kun motor: B5254T10, B5254T11, B5254T8
    • Volvo S80 (2007–)2012Kun motor: B5254T10
    • Volvo V70 (2008–)2008Kun motor: B5254T6
    • Volvo V70 (2008–)2009Kun motor: B5254T6, B5254T8
    • Volvo V70 (2008–)2010–2011Kun motor: B5254T10, B5254T11
    • Volvo V70 (2008–)2012Kun motor: B5254T10

    Hva betyr feilkoden?

    The engine control module (ECM) has not been able to adapt the electronic throttle unit. The adaptation makes sure the throttle unit values stay within the values stored in the control module. The code is set when the ignition has been on for a set time without a successful adaptation, because the stop position limit has been exceeded. Other stored fault codes can prevent the adaptation and should be fixed first.

    Mulige årsaker

    • The throttle is sticking or blocked, for example by oil film or dust
    • Contact resistance or oxidation in the connections between the control module and the throttle unit
    • Damaged throttle unit

    Hva du kan gjøre

    1. 1Read and note the codes. Fix any other stored codes first, since they can prevent the adaptation
    2. 2Look for oil film, dust or any object that could make the throttle stick, and clean carefully if needed
    3. 3Check the throttle unit connector for oxidation and make sure it is firmly seated
    4. 4If you have a diagnostic tool: read the throttle unit adaptation status in live data and see whether it shows that the adaptation is complete
    5. 5If you find no fault or the adaptation does not complete: have a workshop with diagnostic equipment carry it out

    Symptomer du kan merke2

    • Hesitation, surging or jerky running, especially at a steady speed
    • The engine may stall, either occasionally or all the time

    Hva feilen kan påvirke1

    • The control module uses parameters from the latest successful adaptations

    Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.

    OBD Tuning

    Sveriges ledende ekspertsenter for bilelektronikk. Vi tilbyr profesjonell ECU-tuning, reparasjon av styreenheter og diagnostikk med 12 måneders garanti.

    Tjenester

    • Motoroptimalisering
    • ECU Reparasjon
    • Modulkloning
    • Instrumentpanel
    • SRS / Airbag
    • Startsperre

    Database & Diagnostikk

    • ECU-database
    • DTC Feilkodekatalog
    • Diagnoseguider & Måleverdier
    • AI Feilkodeanalysator
    • Nyheter

    ECU-produsenter

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    Selskap

    • Om oss
    • Kontakt
    • Verkstedpartnere
    • Fraktguide
    • Garanti
    • FAQ
    • Vilkår
    • Personvern
    • Nettstedskart

    • Motoroptimalisering
    • ECU Reparasjon
    • Modulkloning
    • Instrumentpanel
    • SRS / Airbag
    • Startsperre

    • ECU-database
    • DTC Feilkodekatalog
    • Diagnoseguider & Måleverdier
    • AI Feilkodeanalysator
    • Nyheter

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    • Om oss
    • Kontakt
    • Verkstedpartnere
    • Fraktguide
    • Garanti
    • FAQ
    • Vilkår
    • Personvern
    • Nettstedskart

    Besøk oss

    Gjuterigatan 29, Karlstad

    Ring oss

    054-830 480

    E-post oss

    service@obdtuning.se

    © 2026 OBD Tuning Karlstad. Alle rettigheter forbeholdt.