Hopp til innhold
    OBD Tuning
    SEND TIL OSS
    SEND TIL OSS
    Hjem
    Feilkoder
    VOLVO
    ECM-P112662
    VOLVO

    ECM-P112662 - Throttle Position (Narrow Range) Sensor Circuit. Algorithm Based Failures. Signal compare failure

    System

    Motorstyring (ECM)

    Volvo-modeller feilkoden gjelder for

    Gjelder følgende modeller:

    5 modeller

    S80 (2007–), V70 (2008–), XC60 (2009–), XC70 (2008–), XC90 (2003–)

    Vis modeller per årsmodell og motor (14)
    • Volvo S80 (2007–)2007–2009Kun motor: B6324S, B8444S
    • Volvo S80 (2007–)2010Kun motor: B6324S, B6324S2, B8444S
    • Volvo S80 (2007–)2011Kun motor: B6324S4, B6324S5, B8444S
    • Volvo S80 (2007–)2012–2015Kun motor: B6324S4, B6324S5
    • Volvo V70 (2008–)2008–2009Kun motor: B6324S
    • Volvo V70 (2008–)2010Kun motor: B6324S, B6324S2
    • Volvo V70 (2008–)2011–2014Kun motor: B6324S5
    • Volvo XC60 (2009–)2010Kun motor: B6324S, B6324S2
    • Volvo XC60 (2009–)2011–2015Kun motor: B6324S4, B6324S5
    • Volvo XC70 (2008–)2008–2009Kun motor: B6324S
    • Volvo XC70 (2008–)2010Kun motor: B6324S, B6324S2
    • Volvo XC70 (2008–)2011–2015Kun motor: B6324S4, B6324S5
    • Volvo XC90 (2003–)2007–2010Kun motor: B6324S
    • Volvo XC90 (2003–)2011–2014Kun motor: B6324S5

    Hva betyr feilkoden?

    The ECM has logged an internal fault when comparing the signals from the narrow-range throttle position sensor. The fault may be caused by a poorly charged battery or corroded cables, but a damaged control module is also possible. If the fault is persistent, the engine control module needs replacing.

    Mulige årsaker

    • Poorly charged battery
    • Corroded connection cables
    • Damaged engine control module (ECM)

    Hva du kan gjøre

    1. 1Look at the battery terminals and cables for corrosion, and check that they are firmly seated
    2. 2Read and note the code, clear it and drive the car to see whether it returns
    3. 3If you have a diagnostic tool: read the diagnostic and fault status of the code and see whether it shows Malfunction found or No malfunction found
    4. 4If the fault remains after these checks: have a workshop check and, if needed, replace the engine control module

    Symptomer du kan merke3

    • Rough idling
    • Message in the information display
    • Warning symbol and text message in the display

    Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.

    OBD Tuning

    Sveriges ledende ekspertsenter for bilelektronikk. Vi tilbyr profesjonell ECU-tuning, reparasjon av styreenheter og diagnostikk med 12 måneders garanti.

    Tjenester

    • Motoroptimalisering
    • ECU Reparasjon
    • Modulkloning
    • Instrumentpanel
    • SRS / Airbag
    • Startsperre

    Database & Diagnostikk

    • ECU-database
    • DTC Feilkodekatalog
    • Diagnoseguider & Måleverdier
    • AI Feilkodeanalysator
    • Nyheter

    ECU-produsenter

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    Selskap

    • Om oss
    • Kontakt
    • Verkstedpartnere
    • Fraktguide
    • Garanti
    • FAQ
    • Vilkår
    • Personvern
    • Nettstedskart

    • Motoroptimalisering
    • ECU Reparasjon
    • Modulkloning
    • Instrumentpanel
    • SRS / Airbag
    • Startsperre

    • ECU-database
    • DTC Feilkodekatalog
    • Diagnoseguider & Måleverdier
    • AI Feilkodeanalysator
    • Nyheter

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    • Om oss
    • Kontakt
    • Verkstedpartnere
    • Fraktguide
    • Garanti
    • FAQ
    • Vilkår
    • Personvern
    • Nettstedskart

    Besøk oss

    Gjuterigatan 29, Karlstad

    Ring oss

    054-830 480

    E-post oss

    service@obdtuning.se

    © 2026 OBD Tuning Karlstad. Alle rettigheter forbeholdt.