Hopp til innhold
    OBD Tuning
    SEND TIL OSS
    SEND TIL OSS
    Hjem
    Feilkoder
    VOLVO
    ECM-P113700
    VOLVO

    ECM-P113700 - Lack Of HO2S12 Switches - Sensor Indicates Lean. General Failure Information. No sub type information

    System

    Motorstyring (ECM)

    Volvo-modeller feilkoden gjelder for

    Gjelder følgende modeller:

    4 modeller

    S80 (2007–), V70 (2008–), XC70 (2008–), XC90 (2003–)

    Vis modeller per årsmodell og motor (9)
    • Volvo S80 (2007–)2007Kun motor: B6324S, B8444S
    • Volvo S80 (2007–)2008Kun motor: B4204S3, B4204S4, B6324S
    • Volvo S80 (2007–)2009–2011Kun motor: B4204S3, B4204S4
    • Volvo V70 (2008–)2008Kun motor: B4204S3, B4204S4, B6324S
    • Volvo V70 (2008–)2009–2011Kun motor: B4204S3, B4204S4
    • Volvo XC70 (2008–)2008Kun motor: B6324S
    • Volvo XC90 (2003–)2005–2006Kun motor: B8444S
    • Volvo XC90 (2003–)2007Kun motor: B6324S, B8444S
    • Volvo XC90 (2003–)2008Kun motor: B6324S

    Hva betyr feilkoden?

    The ECM continuously monitors the voltage of the rear oxygen sensor on bank 1, which is the cylinder row at the front with cylinders 1, 3, 5 and 7. The code is set when the voltage falls outside the range the ECM accepts, or when the sensor wrongly shows a lean mixture.

    Mulige årsaker

    • Contact resistance or oxidation in the connections
    • Signal wire shorted to ground
    • Broken signal wire
    • Damaged rear oxygen sensor on bank 1
    • Air leak in the intake pipe

    Hva du kan gjøre

    1. 1If you have a diagnostic tool: start the engine, let it idle for a while, then read the fault status. Malfunction found means the fault is present now
    2. 2Do not use rust solvent spray or grease in the oxygen sensor connector, and check that it is firmly seated and free from oxidation
    3. 3Inspect the signal wire for chafing, and use a multimeter to check that it is unbroken and has no contact with ground
    4. 4Look for air leaks in the intake pipe, for example at hoses and connections
    5. 5If you find nothing above: try a new rear oxygen sensor, or have a workshop replace it

    Symptomer du kan merke1

    • Malfunction indicator (MIL) lamp is lit

    Hva feilen kan påvirke1

    • Control of the rear oxygen sensor is switched off

    Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.

    OBD Tuning

    Sveriges ledende ekspertsenter for bilelektronikk. Vi tilbyr profesjonell ECU-tuning, reparasjon av styreenheter og diagnostikk med 12 måneders garanti.

    Tjenester

    • Motoroptimalisering
    • ECU Reparasjon
    • Modulkloning
    • Instrumentpanel
    • SRS / Airbag
    • Startsperre

    Database & Diagnostikk

    • ECU-database
    • DTC Feilkodekatalog
    • Diagnoseguider & Måleverdier
    • AI Feilkodeanalysator
    • Nyheter

    ECU-produsenter

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    Selskap

    • Om oss
    • Kontakt
    • Verkstedpartnere
    • Fraktguide
    • Garanti
    • FAQ
    • Vilkår
    • Personvern
    • Nettstedskart

    • Motoroptimalisering
    • ECU Reparasjon
    • Modulkloning
    • Instrumentpanel
    • SRS / Airbag
    • Startsperre

    • ECU-database
    • DTC Feilkodekatalog
    • Diagnoseguider & Måleverdier
    • AI Feilkodeanalysator
    • Nyheter

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    • Om oss
    • Kontakt
    • Verkstedpartnere
    • Fraktguide
    • Garanti
    • FAQ
    • Vilkår
    • Personvern
    • Nettstedskart

    Besøk oss

    Gjuterigatan 29, Karlstad

    Ring oss

    054-830 480

    E-post oss

    service@obdtuning.se

    © 2026 OBD Tuning Karlstad. Alle rettigheter forbeholdt.