VOLVO
ECM-P114506 - Calculated Torque Error. General Failure Information. Algorithm Based Failures
System
Motorstyring (ECM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
5 modellerS80 (2007–), V70 (2008–), XC60 (2009–), XC70 (2008–), XC90 (2003–)
Vis modeller per årsmodell og motor (8)
- Volvo S80 (2007–)2007–2009Kun motor: D5244T4, D5244T5
- Volvo S80 (2007–)2010–2011Kun motor: D4164T
- Volvo V70 (2008–)2008–2009Kun motor: D5244T4, D5244T5
- Volvo V70 (2008–)2010–2011Kun motor: D4164T
- Volvo XC60 (2009–)2009Alle motorer unntatt: B6304T2
- Volvo XC70 (2008–)2008Alle motorer unntatt: B6324S
- Volvo XC70 (2008–)2009Kun motor: D5244T4, D5244T5
- Volvo XC90 (2003–)2013–2014Kun motor: D5244T18, D5244T5
Hva betyr feilkoden?
The engine control module (ECM) compares fuel consumption with the calculated torque. The code is set when fuel consumption is higher than calculated while torque is too low. The cause may be a leak in the fuel or intake system, or a damaged sensor.
Mulige årsaker
- Leak in the fuel system
- Leak in the air intake system
- Damaged boost pressure sensor
- Damaged engine speed (RPM) sensor
Hva du kan gjøre
- 1Check the fuel system for leaks, for example at hoses and connections
- 2Look for air leaks in the intake system at hoses and clamps
- 3Check that the boost pressure sensor connections are firmly seated and free from oxidation
- 4Check the engine speed sensor connections in the same way
- 5If you have a diagnostic tool: start the engine, vary the speed and compare boost pressure in live data with the calculated value
- 6If you find no fault: have a workshop check the boost pressure sensor and the engine speed sensor
Symptomer du kan merke1
- No noticeable symptoms for the driver
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.