VOLVO
ECM-P116752 - Invalid Test, Operator Did Not Actuate Throttle. System Programming Failures. Not activated
System
Motorstyring (ECM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
3 modellerS60 (2011–), S80 (2007–), V70 (2008–)
Vis modeller per årsmodell og motor (9)
- Volvo S60 (2011–)2011–2012Kun motor: B5254T5
- Volvo S80 (2007–)2007–2008Kun motor: B5254T6
- Volvo S80 (2007–)2009Kun motor: B5254T6, B5254T8
- Volvo S80 (2007–)2010–2011Kun motor: B5254T10, B5254T11, B5254T8
- Volvo S80 (2007–)2012Kun motor: B5254T10
- Volvo V70 (2008–)2008Kun motor: B5254T6
- Volvo V70 (2008–)2009Kun motor: B5254T6, B5254T8
- Volvo V70 (2008–)2010–2011Kun motor: B5254T10, B5254T11
- Volvo V70 (2008–)2012Kun motor: B5254T10
Hva betyr feilkoden?
The engine control module (ECM) tries to adapt the throttle unit when it is needed, but stops if the basic conditions are not met, and the code is then set. This can happen if the engine is running, the accelerator pedal is not fully released, or the car is moving. Other stored fault codes can also prevent the adaptation and should be fixed first.
Mulige årsaker
- Basic conditions for the adaptation were not met: the engine was running, the accelerator pedal was not released, or the car was not stationary
- The throttle is sticking or blocked, for example by oil film or dust
- Contact resistance or oxidation in the connections between the control module and the throttle unit
- Damaged throttle unit
Hva du kan gjøre
- 1Fix any other stored fault codes first, since they can prevent the adaptation
- 2The accelerator pedal must be fully released and the car stationary when the adaptation runs, so check this when you try
- 3Look for oil film, dust or any object that could make the throttle stick, and clean carefully if needed
- 4Check the throttle unit connector for oxidation and make sure it is firmly seated
- 5If you find no fault or the adaptation does not complete: have a workshop with diagnostic equipment carry it out
Symptomer du kan merke1
- Poor performance
Hva feilen kan påvirke3
- The adaptation is cancelled
- With a new control module that has never adapted the throttle unit, the throttle motor supply is cut and the throttle returns to its spring position
- The control module may temporarily shut off the fuel supply
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.