VOLVO
ECM-P117068 - Engine Shut Off Solenoid. Algorithm Based Failures. Event information
System
Motorstyring (ECM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
10 modellerS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V60 Cross Country (2015–), V70 (2008–), XC60 (2009–), XC70 (2008–), XC90 (2003–)
Vis modeller per årsmodell og motor (27)
- Volvo S60 (2011–)2011–2012Kun motor: B6304T4
- Volvo S60 (2011–)2013–2014Kun motor: B5204T8, B5204T9, B5254T12, B5254T14, B6304T4
- Volvo S60 (2011–)2015Kun motor: B5204T8, B5204T9, B5254T12, B5254T14, B6304T3, B6304T4, B6304T5
- Volvo S80 (2007–)2007Kun motor: B6324S, B8444S
- Volvo S80 (2007–)2008–2009Kun motor: B6304T2, B6324S, B8444S
- Volvo S80 (2007–)2010Kun motor: B6324S2
- Volvo S80 (2007–)2011–2015Kun motor: B6324S4
- Volvo V40 (2013–)2013–2014Kun motor: B5204T8, B5204T9, B5254T12, B5254T14
- Volvo V40 (2013–)2015Kun motor: B5204T8, B5204T9
- Volvo V40 Cross Country (2013–)2013–2015Kun motor: B5204T8, B5204T9, B5254T12, B5254T14
- Volvo V60 (2011–)2011–2012Kun motor: B6304T4
- Volvo V60 (2011–)2013Kun motor: B5204T8, B5204T9, B6304T4
- Volvo V60 (2011–)2014Kun motor: B5204T8, B5204T9, B5254T12, B6304T4
- Volvo V60 (2011–)2015Kun motor: B5204T9, B5254T12, B6304T3, B6304T4, B6304T5
- Volvo V60 Cross Country (2015–)2015
- Volvo V70 (2008–)2008–2009Kun motor: B6304T2, B6324S
- Volvo V70 (2008–)2010Kun motor: B6324S2
- Volvo XC60 (2009–)2009Kun motor: B6304T2
- Volvo XC60 (2009–)2010Kun motor: B6304T2, B6324S2
- Volvo XC60 (2009–)2011–2014Kun motor: B6304T4, B6324S4
- Volvo XC60 (2009–)2015Kun motor: B5204T9, B5254T12, B5254T14, B6304T4, B6324S4
- Volvo XC70 (2008–)2008Kun motor: B6324S
- Volvo XC70 (2008–)2009Kun motor: B6304T2, B6324S
- Volvo XC70 (2008–)2010Kun motor: B6324S2
- Volvo XC70 (2008–)2011–2015Kun motor: B6324S4
- Volvo XC90 (2003–)2007–2010Kun motor: B6324S
- Volvo XC90 (2003–)2011–2014Kun motor: B6324S5
Hva betyr feilkoden?
This is an event-controlled code, meant as information, and it does not indicate a fault in the control module where it is active. Although the code is named as an engine shut-off solenoid fault, it concerns the front oxygen sensor (bank 1). It is set when lambda reads too low or too high for a while. The code can be caused by overfilling the fuel tank.
Mulige årsaker
- The fuel tank has been overfilled
- Liquid fuel can then enter the EVAP hoses and get pulled into the engine when the EVAP valve opens and venting occurs, which briefly gives the engine too much fuel
Hva du kan gjøre
- 1The code does not need a repair in itself, so you do not need to look for a fault for it
- 2Consider whether the tank was filled above normal level at the last refuelling, since that may be the cause
Symptomer du kan merke1
- No noticeable symptoms for the driver
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.