VOLVO
ECM-P118754 - Variant Selection. System Programming Failures. Missing calibration
System
Motorstyring (ECM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
5 modellerS80 (2007–), V70 (2008–), XC60 (2009–), XC70 (2008–), XC90 (2003–)
Vis modeller per årsmodell og motor (8)
- Volvo S80 (2007–)2007–2009Kun motor: D5244T4, D5244T5
- Volvo S80 (2007–)2010–2011Kun motor: D4164T
- Volvo V70 (2008–)2008–2009Kun motor: D5244T4, D5244T5
- Volvo V70 (2008–)2010–2011Kun motor: D4164T
- Volvo XC60 (2009–)2009Alle motorer unntatt: B6304T2
- Volvo XC70 (2008–)2008Alle motorer unntatt: B6324S
- Volvo XC70 (2008–)2009Kun motor: D5244T4, D5244T5
- Volvo XC90 (2003–)2013–2014Kun motor: D5244T18, D5244T5
Hva betyr feilkoden?
This code concerns variant selection, which means the engine control module (ECM) must be configured to match the car. It is set when the control module has no configuration data, or when the software that was downloaded does not match the car's configuration.
Mulige årsaker
- The ECM has not been programmed yet
- The control module software does not match what the car is configured for
Hva du kan gjøre
- 1Programming the control module is a workshop task, so have a workshop download the correct software for the car
- 2If the control module has recently been replaced, it needs programming for this car, or the code may return
- 3Clear the code after programming and check that it is not set again
Symptomer du kan merke1
- No noticeable symptoms for the driver
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.