VOLVO
ECM-P119300 - EGR Driver Over Current. General Failure Information. No sub type information
System
Motorstyring (ECM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
9 modellerC30 (2007–2013), S40 (2004–2013), S60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V50 (2004–2013), V60 (2011–), V70 (2008–)
Vis modeller per årsmodell og motor (9)
- Volvo C30 (2007–2013)2011–2013Kun motor: D4162T
- Volvo S40 (2004–2013)2011–2012Kun motor: D4162T
- Volvo S60 (2011–)2011–2015Kun motor: D4162T
- Volvo S80 (2007–)2012–2015Kun motor: D4162T
- Volvo V40 (2013–)2013–2015Kun motor: D4162T
- Volvo V40 Cross Country (2013–)2013–2015Kun motor: D4162T
- Volvo V50 (2004–2013)2011–2012Kun motor: D4162T
- Volvo V60 (2011–)2011–2015Kun motor: D4162T
- Volvo V70 (2008–)2012–2015Kun motor: D4162T
Hva betyr feilkoden?
The engine control module (ECM) drives the EGR valve motor and monitors its current consumption all the time. The code is set when current consumption is too high, which may be caused by wiring shorted to supply voltage or a damaged EGR valve. Exhaust gas recirculation (EGR) control is then lost.
Mulige årsaker
- Wiring shorted to supply voltage
- Damaged exhaust gas recirculation (EGR) valve
Hva du kan gjøre
- 1Check that the relevant fuses are intact
- 2If you have a diagnostic tool: activate the EGR valve and see or feel whether it moves
- 3Use a multimeter to check that the EGR valve wiring has no contact with battery positive, and look for chafing
- 4If you find no fault: have a workshop check the EGR valve
Symptomer du kan merke1
- Malfunction indicator lamp comes on or behaves abnormally
Hva feilen kan påvirke1
- Exhaust gas recirculation (EGR) control is lost
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.