VOLVO
ECM-P123A62 - Turbo/Super Charger Boost Sensor A Circuit Range/Performance. Algorithm Based Failures. Signal compare failure
System
Motorstyring (ECM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
7 modellerS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V70 (2008–), XC60 (2009–)
Vis modeller per årsmodell og motor (20)
- Volvo S60 (2011–)2011Kun motor: B4164T, B4164T3, B4204T6, B4204T7
- Volvo S60 (2011–)2012–2014Kun motor: B4164T, B4164T2, B4164T3, B4204T7
- Volvo S60 (2011–)2015Kun motor: B4164T, B4164T2, B4164T3
- Volvo S80 (2007–)2010Kun motor: B4204T6
- Volvo S80 (2007–)2011Kun motor: B4164T, B4204T6, B4204T7
- Volvo S80 (2007–)2012–2014Kun motor: B4164T, B4164T2, B4204T6, B4204T7
- Volvo S80 (2007–)2015Kun motor: B4164T
- Volvo V40 (2013–)2013Kun motor: B4164T, B4164T3
- Volvo V40 (2013–)2014–2015Kun motor: B4164T, B4164T3, B4164T4
- Volvo V40 Cross Country (2013–)2013–2015Kun motor: B4164T
- Volvo V60 (2011–)2011Kun motor: B4164T, B4164T3, B4204T6, B4204T7
- Volvo V60 (2011–)2012–2014Kun motor: B4164T, B4164T2, B4164T3, B4204T7
- Volvo V60 (2011–)2015Kun motor: B4164T, B4164T2, B4164T3
- Volvo V70 (2008–)2010Kun motor: B4204T6
- Volvo V70 (2008–)2011Kun motor: B4164T, B4204T6, B4204T7
- Volvo V70 (2008–)2012–2014Kun motor: B4164T, B4164T2, B4204T7
- Volvo V70 (2008–)2015Kun motor: B4164T, B4164T2
- Volvo XC60 (2009–)2010Kun motor: B4204T6
- Volvo XC60 (2009–)2011–2012Kun motor: B4204T6, B4204T7
- Volvo XC60 (2009–)2013–2015Kun motor: B4204T7
Hva betyr feilkoden?
The engine control module (ECM) compares the boost pressure sensor signal with a value calculated from the atmospheric pressure sensor. The code is set when the boost sensor signal, although within its normal range, is lower than the calculated value.
Mulige årsaker
- Contact resistance or oxidation in the connections
- Loose boost pressure sensor
- Damaged boost pressure sensor
Hva du kan gjøre
- 1Look at the boost sensor connector and check that it is firmly seated and free from oxidation
- 2Check that the boost sensor is correctly fitted and has not come loose
- 3If you have a diagnostic tool: read the boost pressure in live data with the engine idling and compare it with atmospheric pressure
- 4A damaged boost sensor is also possible, so if nothing else is found, have a workshop check or replace the sensor
Symptomer du kan merke1
- Poor performance and lack of power while driving
Hva feilen kan påvirke1
- Boost pressure is limited
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.