VOLVO
ECM-P12827B - Injector Control Pressure Higher Than Desired (engine running). Mechanical Failures. Low fluid level
System
Motorstyring (ECM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
8 modellerS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Vis modeller per årsmodell og motor (8)
- Volvo S60 (2011–)2014–2015Kun motor: D4204T5
- Volvo S80 (2007–)2014–2015Kun motor: D4204T5
- Volvo V40 (2013–)2015Kun motor: D4204T14
- Volvo V40 Cross Country (2013–)2015Kun motor: D4204T14
- Volvo V60 (2011–)2014–2015Kun motor: D4204T5
- Volvo V70 (2008–)2014–2015Kun motor: D4204T5
- Volvo XC60 (2009–)2014–2015Kun motor: D4204T5
- Volvo XC70 (2008–)2014–2015Kun motor: D4204T5
Hva betyr feilkoden?
The engine control module (ECM) compares the fuel pressure on the high-pressure side with the largest permitted deviation above the correct pressure, which depends on engine load and speed. The code is set when the deviation becomes too large. A low fuel level in the tank is one of the causes. The check is only made with the engine running.
Mulige årsaker
- Low fuel level in the tank
- The fuel flow control valve is damaged
- The fuel pressure control valve is damaged
- Air in the fuel system
- Too high back pressure on the return side of the fuel system
Hva du kan gjøre
- 1Check the fuel level in the tank and top up if it is low.
- 2Search the fuel system for leaks, for example wet spots or a smell of fuel under the car.
- 3If there are fault codes for the fuel pump, deal with them before going further.
- 4With a diagnostic tool, follow fuel pressure in live data at idle and at light throttle; the measured value should track the requested one.
- 5Have a workshop check the pressure sensor connector and wiring, the injector valves and the fuel filter, as this needs measurements.
Symptomer du kan merke1
- Unusual noise while driving
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.