VOLVO
ECM-P129513 - Injector Multiple Faults - Bank 1. General Electrical Failures. Circuit open
System
Motorstyring (ECM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
5 modellerS80 (2007–), V70 (2008–), XC60 (2009–), XC70 (2008–), XC90 (2003–)
Vis modeller per årsmodell og motor (8)
- Volvo S80 (2007–)2007–2009Kun motor: D5244T4, D5244T5
- Volvo S80 (2007–)2010–2011Kun motor: D4164T
- Volvo V70 (2008–)2008–2009Kun motor: D5244T4, D5244T5
- Volvo V70 (2008–)2010–2011Kun motor: D4164T
- Volvo XC60 (2009–)2009Alle motorer unntatt: B6304T2
- Volvo XC70 (2008–)2008Alle motorer unntatt: B6324S
- Volvo XC70 (2008–)2009Kun motor: D5244T4, D5244T5
- Volvo XC90 (2003–)2013–2014Kun motor: D5244T18, D5244T5
Hva betyr feilkoden?
The engine control module finds that the signal to the injectors in bank 1 is missing and sets the code. This can be caused by an open circuit in the wiring to the injectors, by damaged injectors, or by an internal fault in the module.
Mulige årsaker
- Open circuit in the wiring to the injectors
- Damaged injectors
- Internal fault inside the ECM
Hva du kan gjøre
- 1Check that the fuses are intact. The locations are in the owner's manual or on the fuse box cover.
- 2Check that the connectors to the injectors in bank 1 are secure and not corroded.
- 3Look for broken or chafed wires to the injectors in bank 1.
- 4Use a multimeter to check that the wiring to the injectors in bank 1 has no break, with the ignition off.
- 5If the fault returns, have a workshop with diagnostic equipment check the injectors and the control module.
Symptomer du kan merke4
- The engine does not start, and when the fault shows is unclear
- Poor performance, the car lacks power
- The engine stalls
- The engine does not turn over, with or without a clicking sound at a start attempt
Hva feilen kan påvirke1
- Injection stops
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.