VOLVO
ECM-P130378 - Exhaust Gas Recirculation Calibration Fault. Mechanical Failures. Alignment or adjustment incorrect
System
Motorstyring (ECM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
9 modellerC30 (2007–2013), S40 (2004–2013), S60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V50 (2004–2013), V60 (2011–), V70 (2008–)
Vis modeller per årsmodell og motor (9)
- Volvo C30 (2007–2013)2011–2013Kun motor: D4162T
- Volvo S40 (2004–2013)2011–2012Kun motor: D4162T
- Volvo S60 (2011–)2011–2015Kun motor: D4162T
- Volvo S80 (2007–)2012–2015Kun motor: D4162T
- Volvo V40 (2013–)2013–2015Kun motor: D4162T
- Volvo V40 Cross Country (2013–)2013–2015Kun motor: D4162T
- Volvo V50 (2004–2013)2011–2012Kun motor: D4162T
- Volvo V60 (2011–)2011–2015Kun motor: D4162T
- Volvo V70 (2008–)2012–2015Kun motor: D4162T
Hva betyr feilkoden?
The code concerns the setting or adjustment of the EGR valve in the exhaust gas recirculation system. The engine control module compares the learned limits of the valve for closed and open positions and sets the code when the limit for the closed valve is outside what is permitted. It can also come up with a software update, in which case deleting it is enough.
Mulige årsaker
- The code can be stored during a software update and should then be deleted without further troubleshooting
- The EGR valve sticks, for example due to dirt or soot
- Damaged EGR valve
Hva du kan gjøre
- 1If the code came up with a software update, deleting it is enough.
- 2Use the DTC counter to see whether the code has been set only once, and whether no new faults have been found over several drive cycles after that.
- 3Look for dirt or soot around the EGR valve, as a valve that sticks can cause the fault.
- 4Have a workshop check or adjust the EGR valve setting with diagnostic equipment. If the valve is damaged it needs replacing.
Symptomer du kan merke1
- No noticeable symptoms for the driver
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.